SKF · rolling bearings
SKF YET 211-203
Insert bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 55.563 mm |
|---|---|
| Bore diameter | 55.563 mm |
| Outside diameter | 100 mm |
| Width, total | 48.4 mm |
| Width, inner ring | 32.6 mm |
| Width, outer ring | 25 mm |
| Basic dynamic load rating | 43.6 kN |
| Basic static load rating | 29 kN |
| Limiting speed | 3600 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Retaining feature, inner ring | Eccentric collar |
| Bore type | Cylindrical |
| Rolling elements | Balls |
| Outer ring type | Spherical |
| Inner ring extension | On one side |
| Cage | Non-metallic |
| Rubber seating ring | Without |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Seal on both sides |
| Sealing type | Contact, standard |
| Lubricant | Grease |
| Relubrication feature | With |
| Product net weight | 0.987 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Dimensions · Bore diameter · (d) | 55.563 mm |
| Dimensions · Outside diameter · (D) | 100 mm |
| Dimensions · Overall bearing width · (B_1) | 48.4 mm |
| Dimensions · Width of inner ring · (B) | 32.6 mm |
| Dimensions · Width of outer ring · (C) | 25 mm |
| Dimensions · Outside diameter of inner ring · (d_1) · ≈ | 69.06 mm |
| Dimensions · Outside diameter of locking collar · (d_2) | 74.5 mm |
| Dimensions · Distance from side face to thread centre · (B_4) | 7.9 mm |
| Dimensions · Chamfer dimension of inner ring · (r_1,2) · min. | 1 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 35.9 mm |
| Calculation data · Basic dynamic load rating · (C) | 43.6 kN |
| Calculation data · Basic static load rating · (C_0) | 29 kN |
| Calculation data · Fatigue load limit · (P_u) | 1.25 kN |
| Calculation data · Limiting speed | 3600 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Calculation data · Calculation factor · (f_0) | 14 |
| Mounting information · Set screw · (G_2) | 7/16-20 UNF |
| Mounting information · Hexagonal key size for set screw · (N) | 5.556 mm |
| Mounting information · Recommended tightening torque for set screw | 28.5 N·m |
Family specifications and selection conditions
| Product description | Insert bearings are based on sealed deep groove ball bearings. This variant is intended for use in applications where the direction of rotation is constant. It has a narrow inner ring extended on one side, with an eccentric locking collar, enabling quick and easy mounting onto the shaft. |
|---|---|
| Manufacturer features | Designed for rotation in one direction • Quick and easy to mount onto the shaft • Long service life • Reduce noise and vibration levels |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.