SKF · mounted bearings
SKF WSTUC 40M-TPSS
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 40 mm |
|---|---|
| Housing overall width | 41 mm |
| Bearing width, total | 49.2 mm |
| Basic dynamic load rating | 24.7 kN |
| Basic static load rating | 19 kN |
| Limiting speed | 2800 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Take-up |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, gutter |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 0.853 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | Not standardized |
| Purpose specific | For food and beverage applications |
| Sealing type, bearing | Contact, gutter |
| Dimensions · Bore diameter · (d) | 40 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 51.8 mm |
| Dimensions · Centring diameter · (D_c) | 88 mm |
| Dimensions · Groove height for backseal · (H_a) | 6 mm |
| Dimensions · Overall width · (A) | 41 mm |
| Dimensions · Width of piloting groove · (A_1) | 16 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 32 mm |
| Dimensions · Standout of end cover · (A_5) | 70.9 mm |
| Dimensions · Width of inner ring · (B) | 49.2 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 10 mm |
| Dimensions · Overall height · (H) | 113 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 101.8 mm |
| Dimensions · Height of attachment end · (H_2) | 46 mm |
| Dimensions · Overall length · (L) | 134 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 85 mm |
| Dimensions · Length of piloting groove · (L_3) | 80 mm |
| Dimensions · Thread size attachment end · (G) | M16 |
| Dimensions · Thread length · (G_1) | 24 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 30.2 mm |
| Calculation data · Basic dynamic load rating · (C) | 24.7 kN |
| Calculation data · Basic static load rating · (C_0) | 19 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.8 kN |
| Calculation data · Limiting speed | 2800 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | M8x1 |
| Mounting information · Hexagonal key size for set screw | 4 mm |
| Mounting information · Recommended tightening torque for set screw | 6.5 N·m |
Family specifications and selection conditions
| Product description | Take-up ball bearing units for the SKF Food Line consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing. They are strong, yet lightweight, and chemically resistant to detergents and contaminants. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, that makes it easy to mount. |
|---|---|
| Manufacturer features | Strong, yet lightweight • Chemically resistant • Designed for an alternating rotation • Well suited to follow the highest food safety standards • Reliable in wet environments |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.