SKF · mounted bearings
SKF WSTUC 35M-CPSS-DFH
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 35 mm |
|---|---|
| Housing overall width | 39 mm |
| Bearing width, total | 34.9 mm |
| Basic dynamic load rating | 21.6 kN |
| Basic static load rating | 15.3 kN |
| Limiting speed | 500 r/min |
| Housing type | Take-up |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides and flinger on one side |
| Sealing type | Contact, gutter |
| Sealing, unit | End cover and back seal |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 0.686 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | Not standardized |
| Purpose specific | For food and beverage applications |
| Sealing type, bearing | Contact, gutter |
| Dimensions · Bore diameter · (d) | 35 mm |
| Dimensions · Overall width · (A) | 39 mm |
| Dimensions · Width of piloting groove · (A_1) | 12 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 30 mm |
| Dimensions · Standout of end cover · (A_5) | 67.6 mm |
| Dimensions · Width of inner ring · (B) | 34.9 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 6 mm |
| Dimensions · Overall height · (H) | 103 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 88.8 mm |
| Dimensions · Height of attachment end · (H_2) | 40 mm |
| Dimensions · Overall length · (L) | 122 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 76 mm |
| Dimensions · Length of piloting groove · (L_3) | 63 mm |
| Dimensions · Thread size attachment end · (G) | M16 |
| Dimensions · Thread length · (G_1) | 24 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 25.4 mm |
| Calculation data · Basic dynamic load rating · (C) | 21.6 kN |
| Calculation data · Basic static load rating · (C_0) | 15.3 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.655 kN |
| Calculation data · Limiting speed | 500 r/min |
| Mounting information · Set screw · (G_2) | M6x0.75 |
| Mounting information · Hexagonal key size for set screw | 3 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
Family specifications and selection conditions
| Product description | Take-up ball bearing units for the SKF Food Line, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing. They are strong, yet lightweight, and chemically resistant to detergents and contaminants. This variant is intended for use in applications where the direction of rotation is alternating. It has an inner ring extended on one side and is locked by tightening a set screw on the inner ring, which makes it easy to mount. |
|---|---|
| Manufacturer features | Strong, yet lightweight • Chemically resistant • Designed for an alternating rotation • Well suited to follow the highest food safety standards • Reliable in wet environments |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.