SKF · mounted bearings
SKF WSTU 415-SRB-CRE
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 125.413 mm |
|---|---|
| Distance of frame guides (take up) | 260.35 mm |
| Housing overall width | 127 mm |
| Bearing width, total | 116.992 mm |
| Basic dynamic load rating | 758 kN |
| Basic static load rating | 930 kN |
| Limiting speed | 1550 r/min |
| Unit system | Inch |
| Housing type | Take-up, wide slot |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | SKF ConCentra |
| Bearing position | Non-locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 47.5 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | SKF ConCentra |
| Dimensions · Shaft diameter · (d_a) | 125.413 mm |
| Dimensions · Collar diameter · (d_2) | 164.998 mm |
| Dimensions · Housing width · (A) | 127 mm |
| Dimensions · Width of piloting groove · (A_1) | 52.4 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 106.363 mm |
| Dimensions · Width including end cover · (A_5) | 169.069 mm |
| Dimensions · Inner ring width · (B) | 116.992 mm |
| Dimensions · Overall housing height · (H) | 285.75 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 260.35 mm |
| Dimensions · Height of attachment end · (H_2) | 177.8 mm |
| Dimensions · Housing length · (L) | 396.875 mm |
| Dimensions · Distance from attachment end face to centre line of bearing · (L_1) | 261.938 mm |
| Dimensions · Length of attachment end · (L_2) | 63.5 mm |
| Dimensions · Length of guiding slot · (L_3) | 228.6 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 60.325 mm |
| Dimensions · Length of attachment slot · (N_1) | 63.5 mm |
| Dimensions · Height of attachment slot · (N_2) | 95.25 mm |
| Dimensions · Inner ring center to end · (s_1) | 59.36 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Overall unit width · (T) | 111.125 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 758 kN |
| Calculation data · Basic static load rating · (C_0) | 930 kN |
| Calculation data · Fatigue load limit · (P_u) | 88 kN |
| Calculation data · Limiting speed | 1550 r/min |
| Calculation data · Limiting value · (e) | 0.27 |
| Calculation data · Calculation factor · (Y_1) | 2.5 |
| Calculation data · Calculation factor · (Y_2) | 3.7 |
| Calculation data · Calculation factor · (Y_0) | 2.5 |
| Calculation data · Bearing mean diameter · (d_m) | 180.086 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 64.9 kN |
| Mounting information · Set screw | M8-1.25 x 20mm |
| Mounting information · Tightening torque for set screws | 18.1 N·m |
| Mounting information · Grease quantity for relubrication | 28 g |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Take-up units can support rotating shafts in take-up frames common in the marketplace. The SKF ConCentra locking combines easy mounting and a concentric tight fit on the shaft for high speeds and low vibration. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick locking on the shaft • True concentric fit on the shaft for high speeds and low vibration |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.