SKF · mounted bearings
SKF WSTU 215-SRB-TRE
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 74.613 mm |
|---|---|
| Distance of frame guides (take up) | 150.876 mm |
| Housing overall width | 79.375 mm |
| Width, total | 92.075 mm |
| Basic dynamic load rating | 212 kN |
| Basic static load rating | 240 kN |
| Limiting speed | 2100 r/min |
| Unit system | Inch |
| Housing type | Take-up, wide slot |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Tapered locking |
| Bearing position | Non-locating |
| Bore type | Tapered |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 10.3 kg |
| eClass code | 23-05-16-03 |
| UNSPSC code | 31171511 |
| Metric/inch series | Inch |
| Locking method | Tapered locking |
| Dimensions · Shaft diameter · (d_a) | 74.613 mm |
| Dimensions · Collar diameter · (d_2) | 115 mm |
| Dimensions · Housing width · (A) | 79.375 mm |
| Dimensions · Width of piloting groove · (A_1) | 45.974 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 68.263 mm |
| Dimensions · Width including end cover · (A_5) | 109.538 mm |
| Dimensions · Inner ring width · (B) | 90.4 mm |
| Dimensions · Overall housing height · (H) | 169.069 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 150.876 mm |
| Dimensions · Height of attachment end · (H_2) | 123.825 mm |
| Dimensions · Housing length · (L) | 225.425 mm |
| Dimensions · Distance from attachment end face to centre line of bearing · (L_1) | 146.05 mm |
| Dimensions · Length of attachment end · (L_2) | 28.575 mm |
| Dimensions · Length of guiding slot · (L_3) | 114.3 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 41.275 mm |
| Dimensions · Length of attachment slot · (N_1) | 38.1 mm |
| Dimensions · Height of attachment slot · (N_2) | 69.85 mm |
| Dimensions · Inner ring center to end · (s_1) | 57.658 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Overall unit width · (T) | 92.075 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 212 kN |
| Calculation data · Basic static load rating · (C_0) | 240 kN |
| Calculation data · Fatigue load limit · (P_u) | 26.5 kN |
| Calculation data · Limiting speed | 2100 r/min |
| Calculation data · Limiting value · (e) | 0.22 |
| Calculation data · Calculation factor · (Y_1) | 3 |
| Calculation data · Calculation factor · (Y_2) | 4.6 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 102.616 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 24.9 kN |
| Mounting information · Set screw | M6-1 x 14mm |
| Mounting information · Tightening torque for set screws | 7 N·m |
| Mounting information · Grease for relubrication | LGEP 2 |
| Mounting information · Grease quantity for relubrication | 8 g |
Family specifications and selection conditions
| Product description | Pillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface. The units are sealed and lubricated and ready to use. This assortment of units covers a wide range of requirements, in metric and inch dimensions. |
|---|---|
| Manufacturer features | Ready to mount • Factory lubricated and sealed • Quick locking on the shaft • Long service life • Easy to replace |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.