SKF · mounted bearings
SKF WSTU 208-SRB-TRH
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 63.5 mm |
|---|---|
| Distance of frame guides (take up) | 130.175 mm |
| Housing overall width | 71.438 mm |
| Width, total | 88.106 mm |
| Basic dynamic load rating | 193 kN |
| Basic static load rating | 183 kN |
| Limiting speed | 2500 r/min |
| Unit system | Inch |
| Housing type | Take-up, wide slot |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Tapered locking |
| Bearing position | Locating |
| Bore type | Tapered |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 7.89 kg |
| eClass code | 23-05-16-03 |
| UNSPSC code | 31171511 |
| Metric/inch series | Inch |
| Locking method | Tapered locking |
| Dimensions · Shaft diameter · (d_a) | 63.5 mm |
| Dimensions · Collar diameter · (d_2) | 105 mm |
| Dimensions · Housing width · (A) | 71.438 mm |
| Dimensions · Width of piloting groove · (A_1) | 27 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 65.088 mm |
| Dimensions · Width including end cover · (A_5) | 103.188 mm |
| Dimensions · Inner ring width · (B) | 88.087 mm |
| Dimensions · Overall housing height · (H) | 149.225 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 130.175 mm |
| Dimensions · Height of attachment end · (H_2) | 107.95 mm |
| Dimensions · Housing length · (L) | 195.263 mm |
| Dimensions · Distance from attachment end face to centre line of bearing · (L_1) | 127 mm |
| Dimensions · Length of attachment end · (L_2) | 26.988 mm |
| Dimensions · Length of guiding slot · (L_3) | 111.125 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 34.925 mm |
| Dimensions · Length of attachment slot · (N_1) | 31.75 mm |
| Dimensions · Height of attachment slot · (N_2) | 63.5 mm |
| Dimensions · Inner ring center to end · (s_1) | 55.575 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Overall unit width · (T) | 88.106 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 193 kN |
| Calculation data · Basic static load rating · (C_0) | 183 kN |
| Calculation data · Fatigue load limit · (P_u) | 24 kN |
| Calculation data · Limiting speed | 2500 r/min |
| Calculation data · Limiting value · (e) | 0.24 |
| Calculation data · Calculation factor · (Y_1) | 2.8 |
| Calculation data · Calculation factor · (Y_2) | 4.2 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 92.456 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 20 kN |
| Mounting information · Set screw | M6-1 x 14mm |
| Mounting information · Tightening torque for set screws | 7 N·m |
| Mounting information · Grease for relubrication | LGEP 2 |
| Mounting information · Grease quantity for relubrication | 7 g |
Family specifications and selection conditions
| Product description | Pillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface. The units are sealed and lubricated and ready to use. This assortment of units covers a wide range of requirements, in metric and inch dimensions. |
|---|---|
| Manufacturer features | Ready to mount • Factory lubricated and sealed • Quick locking on the shaft • Long service life • Easy to replace |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.