SKF · mounted bearings
SKF WSTU 203-WF
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 55.563 mm |
|---|---|
| Housing overall width | 64.3 mm |
| Bearing width, total | 71.4 mm |
| Basic dynamic load rating | 43.6 kN |
| Basic static load rating | 29 kN |
| Limiting speed | 3600 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Take-up |
| Retaining feature, inner ring | Eccentric collar |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Inch |
| Product net weight | 3.8 kg |
| eClass code | 23-05-16-01 |
| UNSPSC code | 31171536 |
| Compliance with standard | North American standard |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 55.563 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 69.06 mm |
| Dimensions · Outside diameter of locking ring · (d_2) | 74.5 mm |
| Dimensions · Overall width · (A) | 64.3 mm |
| Dimensions · Width of piloting groove · (A_1) | 27 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 38.1 mm |
| Dimensions · Standout of end cover · (A_5) | 37.5 mm |
| Dimensions · Overall bearing width · (B_1) | 71.4 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 7.9 mm |
| Dimensions · Overall height · (H) | 146.1 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 130.2 mm |
| Dimensions · Height of attachment end · (H_2) | 102.4 mm |
| Dimensions · Overall width · (L) | 171.5 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 106.4 mm |
| Dimensions · Length attachment end · (L_2) | 19.1 mm |
| Dimensions · Length of piloting groove · (L_3) | 95.3 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 34.9 mm |
| Dimensions · Length of attachment slot · (N_1) | 25.4 mm |
| Dimensions · Height of attachment slot · (N_2) | 64.3 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 43.6 mm |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/8-27 NPT |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 3.5 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 30 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.579 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 11.113 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 43.6 kN |
| Calculation data · Basic static load rating · (C_0) | 29 kN |
| Calculation data · Fatigue load limit · (P_u) | 1.25 kN |
| Calculation data · Limiting speed | 3600 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | 7/16-20 UNF |
| Mounting information · Hexagonal key size for set screw | 5.556 mm |
| Mounting information · Recommended tightening torque for set screw | 28.5 N·m |
Family specifications and selection conditions
| Product description | Take-up ball bearing units consisting of an insert bearing mounted in a composite or cast metal housing. The units are typically mounted in take-up frames and adjusted by an adjustment screw. In addition to being part of a unit, some take-up housings for insert bearings are available as separate components. The SKF assortment includes take-up ball bearing units compliant with several industrial standards, as required by many industrial applications. |
|---|---|
| Manufacturer features | Ready to mount • Lubricated and sealed bearings • Quick locking on the shaft • Large variety of housing shapes, housing materials, and locking methods • Concentric locking options for high speeds and low vibration |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.