SKF · industrial seals
SKF WAT187-9375-1595-E8D
Guide rings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Piston groove diameter / Rod diameter | 228.6 mm |
|---|---|
| Cylinder bore diameter / Housing groove bore diameter | 238.13 mm |
| Housing groove width | 40.77 mm |
| Ultimate compressive strength | 158 N/mm² |
| Design | WAT |
| Material | Polyamide (PA P-2551) |
| Product net weight | 0.417 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Inside diameter · (d) | 228.6 mm |
| Dimensions · Outside diameter · (D) | 238.13 mm |
| Dimensions · Groove width · (L) | 40.77 mm |
| Dimensions · Guide ring thickness · (t) | 4.75 mm |
| Dimensions · Groove radius · (R) · max. | 0.6 mm |
| Dimensions · Retainer radius · (r) | 0.2 mm |
| Dimensions · Retainer height · (h) · ≥ | 2.37 mm |
| Dimensions · Tolerances for piston application · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances for piston application · Lower limit deviation | -0.102 mm |
| Dimensions · Tolerances for piston application · Upper limit deviation · (tol D) | 0.152 mm |
| Dimensions · Tolerances for piston application · Lower limit deviation | 0 mm |
| Dimensions · Tolerances for piston application · Dimension | Tolerance for D can require adjustment depending on piston seal and maximum e-gap. mm |
| Dimensions · Tolerances for piston application · Upper limit deviation · (tol L) | 0.254 mm |
| Dimensions · Tolerances for rod application · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances for rod application · Lower limit deviation | -0.1 mm |
| Dimensions · Tolerances for rod application · Dimension | Tolerance for d can require adjustment depending on rod seal and maximum e-gap. mm |
| Dimensions · Tolerances for rod application · Upper limit deviation · (tol D) | 0.1 mm |
| Dimensions · Tolerances for rod application · Lower limit deviation | 0 mm |
| Dimensions · Tolerances for rod application · Upper limit deviation · (tol L) | 0.254 mm |
| Material · Material guide ring | Polyamide (PA P-2551) |
| Material · Ultimate compressive strength | 158 N/mm² |
| Operating conditions · Speed · max. | 1 m/s |
| Operating conditions · Temperature · max. | 120 °C |
| Operating conditions · Maximum recommended bearing load pressure at 20 °C (70 °F) | 40 N/mm² |
| Operating conditions · Maximum recommended bearing load pressure at 80 °C (175 °F) | 30 N/mm² |
| Operating conditions · Dimension | Maximum values are for intermittent exposure and should not be applied simultaneously. |
Family specifications and selection conditions
| Product description | Hydraulic guide rings are made of polymer materials and prevent metal-to-metal contact between moving parts in a working hydraulic cylinder. They accommodate radial loads, acting on the cylinder assembly, guiding the rod in the cylinder head and the piston in the cylinder bore. The special SKF hydraulic guide design provides a long service life and increases resistance to wear to cylinder surfaces. |
|---|---|
| Manufacturer features | Guide of polymer material • Long service life • If not in stock alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.