BEARING WORLD

SKF · industrial seals

SKF UNP-180X165X10-E6W

Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.

Product directory / SKF

Request a quote for this productTalk to Bearing World

لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.

Manufacturer-listed technical specifications
Cylinder bore diameter180 mm
Piston groove diameter165 mm
Piston groove width10 mm
Pressure limit, maximum35 N/mm²
DesignUNP
Primary sealing elementPolyurethane (TPU U-1029)
Unit systemMetric
Product net weight0.0391 kg
eClass code23-07-01-90
UNSPSC code31181602
Dimensions · Cylinder bore diameter · (D)180 mm
Dimensions · Piston groove diameter · (d)165 mm
Dimensions · Piston groove width · (L)10 mm
Dimensions · Additional groove width · (L+H)12 mm
Dimensions · Nominal seal width · (H)9 mm
Dimensions · Radial depth · (S)7.5 mm
Dimensions · Groove radius · (R) · max.0.5 mm
Dimensions · Lead-in chamfer length · (C) · min.7 mm
Dimensions · Tolerances · Upper limit deviation · (tol D)0.1 mm
Dimensions · Tolerances · Lower limit deviation0 mm
Dimensions · Tolerances · Tolerance class for cylinder bore diameterH9
Dimensions · Tolerances · Upper limit deviation · (tol d)0 mm
Dimensions · Tolerances · Lower limit deviation-0.1 mm
Dimensions · Tolerances · Tolerance class for piston groove diameterh9
Dimensions · Tolerances · Upper limit deviation · (tol L)0.2 mm
Dimensions · Tolerances · Upper limit deviation · (tol L+B)0.2 mm
Maximum extrusion gap · Reference temperature for extrusion gap80 °C
Maximum extrusion gap · Extrusion gap at 160 bar · (e)0.5 mm
Maximum extrusion gap · Extrusion gap at 250 bar · (e)0.3 mm
Maximum extrusion gap · Extrusion gap at 350 bar · (e)0.15 mm
Pressure and speed · Pressure · max.350 bar
Pressure and speed · Speed at pressure ≤ 250 bar1 m/s
Pressure and speed · Speed at pressure ≤ 350 bar0.5 m/s
Operating temperature · Extreme upper temperature limit · (T_6) · max.130 °C
Operating temperature · Reduced performance upper temperature limit · (T_5) · max.120 °C
Operating temperature · Upper operating temperature limit · (T_4) · max.110 °C
Operating temperature · Lower operating temperature limit · (T_3) · min.-30 °C
Operating temperature · Reduced performance lower temperature limit · (T_2) · min.-40 °C
Operating temperature · Extreme lower temperature limit · (T_1) · min.-60 °C
Operating temperature · DimensionMaximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
Materials · Primary sealing elementPolyurethane (TPU U-1029)

Family specifications and selection conditions

Manufacturer-listed technical specifications
Product descriptionUNP seals are single-acting U-cup seals made of thermoplastic polyurethane. They may be used in double-acting cylinders when using two seals in a back-to-back arrangement.
Manufacturer featuresSingle-acting seals • Suitable for light to medium duty applications • Available in metric and inch sizes • If not in stock alternatives can be produced by SKF SEAL JET systems • Two back-to-back seals can be used for double-acting cylinders

Manufacturer references

Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.

Explore SKF at Bearing World