SKF · mounted bearings
SKF UKT 206 K/H
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 25 mm |
|---|---|
| Housing overall width | 37 mm |
| Bearing width, total | 28 mm |
| Basic dynamic load rating | 19.5 kN |
| Basic static load rating | 11.2 kN |
| Limiting speed | 5000 r/min |
| Housing type | Take-up |
| Retaining feature, inner ring | Adapter sleeve |
| Bore type | Tapered |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Metric |
| Associated mounting tool | HN 6 |
| Product net weight | 1.2 kg |
| eClass code | 23-05-16-02 |
| UNSPSC code | 31171536 |
| Dimension | Order adapter sleeve separately |
| Compliance with standard | JIS |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 25 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 39.7 mm |
| Dimensions · Outside diameter of lock nut · (d_3) | 45 mm |
| Dimensions · Overall width · (A) | 37 mm |
| Dimensions · Width of piloting groove · (A_1) | 12 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 28 mm |
| Dimensions · Standout of end cover · (A_5) | 22.5 mm |
| Dimensions · Width of sleeve · (B_1) | 38 mm |
| Dimensions · Overall height · (H) | 102 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 89 mm |
| Dimensions · Height of attachment end · (H_2) | 56 mm |
| Dimensions · Overall width · (L) | 113 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 70 mm |
| Dimensions · Length attachment end · (L_2) | 10 mm |
| Dimensions · Length of piloting groove · (L_3) | 57 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 22 mm |
| Dimensions · Length of attachment slot · (N_1) | 16 mm |
| Dimensions · Height of attachment slot · (N_2) | 37.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 22.25 mm |
| Dimensions · Dimension | Value specified for s_1 is approximate and before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/4-28 UNF |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 2.5 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 30 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.6 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 7.94 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 UNF |
| Calculation data · Basic dynamic load rating · (C) | 19.5 kN |
| Calculation data · Basic static load rating · (C_0) | 11.2 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.475 kN |
| Calculation data · Limiting speed | 5000 r/min |
| Mounting information · Associated spanner | HN 6 |
| Mounting information · Recommended lock nut tightening angle · (α) | 95 ° |
Family specifications and selection conditions
| Product description | Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. The units are locked with an adapter sleeve, enabling quick and easy mounting onto the shaft. This permits the full limiting speed to be achieved, even where using commercial-grade shafts. The adapter sleeve needs to be ordered separately. |
|---|---|
| Manufacturer features | Quick and easy to mount onto the shaft • Accommodate static initial misalignment • Long service life • Reduced noise and vibration levels |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.