SKF · mounted bearings
SKF UCT 207/H
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 35 mm |
|---|---|
| Housing overall width | 37 mm |
| Bearing width, total | 42.9 mm |
| Basic dynamic load rating | 25.5 kN |
| Basic static load rating | 15.3 kN |
| Limiting speed | 4300 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Take-up |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Metric |
| Product net weight | 1.57 kg |
| Compliance with standard | JIS |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 35 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 46.1 mm |
| Dimensions · Overall width · (A) | 37 mm |
| Dimensions · Width of piloting groove · (A_1) | 12 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 30 mm |
| Dimensions · Standout of end cover · (A_5) | 24.5 mm |
| Dimensions · Width of inner ring · (B) | 42.9 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 6 mm |
| Dimensions · Overall height · (H) | 102 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 89 mm |
| Dimensions · Height of attachment end · (H_2) | 64 mm |
| Dimensions · Overall width · (L) | 129 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 78 mm |
| Dimensions · Length attachment end · (L_2) | 13 mm |
| Dimensions · Length of piloting groove · (L_3) | 64 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 22 mm |
| Dimensions · Length of attachment slot · (N_1) | 16 mm |
| Dimensions · Height of attachment slot · (N_2) | 37.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 25.4 mm |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/4-28 UNF |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 3.5 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 30 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.6 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 7.94 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 UNF |
| Calculation data · Basic dynamic load rating · (C) | 25.5 kN |
| Calculation data · Basic static load rating · (C_0) | 15.3 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.655 kN |
| Calculation data · Limiting speed | 4300 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | M6x0.75 |
| Mounting information · Hexagonal key size for set screw | 3 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
Family specifications and selection conditions
| Product description | Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. |
|---|---|
| Manufacturer features | Designed for an alternating rotation • Quick and easy to mount onto the shaft • Accommodate static initial misalignment • Long service life • Reduced noise and vibration levels |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.