SKF · mounted bearings
SKF TU 1.3/16 TF
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 30.163 mm |
|---|---|
| Housing overall width | 37 mm |
| Bearing width, total | 38.1 mm |
| Basic dynamic load rating | 19.5 kN |
| Basic static load rating | 11.2 kN |
| Limiting speed | 6300 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Take-up |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Inch |
| Product net weight | 1.22 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | ISO |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 30.163 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 39.7 mm |
| Dimensions · Overall width · (A) | 37 mm |
| Dimensions · Width of piloting groove · (A_1) | 13.5 mm |
| Dimensions · Width of flange in which piloting grooves are provided · (A_2) | 28 mm |
| Dimensions · Standout of end cover · (A_5) | 21 mm |
| Dimensions · Width of inner ring · (B) | 38.1 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 5 mm |
| Dimensions · Overall height · (H) | 104 mm |
| Dimensions · Distance between bottoms of piloting grooves · (H_1) | 89 mm |
| Dimensions · Height of attachment end · (H_2) | 56 mm |
| Dimensions · Overall width · (L) | 114 mm |
| Dimensions · Distance from attachment end face to centre line of spherical seat diameter · (L_1) | 70 mm |
| Dimensions · Length attachment end · (L_2) | 10 mm |
| Dimensions · Length of piloting groove · (L_3) | 57 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 22 mm |
| Dimensions · Length of attachment slot · (N_1) | 16 mm |
| Dimensions · Height of attachment slot · (N_2) | 37 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 22.2 mm |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/4-28 UNF |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 3.5 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 30 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.5 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 7 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 SAE-LT |
| Calculation data · Basic dynamic load rating · (C) | 19.5 kN |
| Calculation data · Basic static load rating · (C_0) | 11.2 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.475 kN |
| Calculation data · Limiting speed | 6300 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | 1/4-28 UNF |
| Mounting information · Hexagonal key size for set screw | 3.175 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
Family specifications and selection conditions
| Product description | Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, which makes it easy to mount. |
|---|---|
| Manufacturer features | Designed for an alternating rotation • Quick and easy to mount onto the shaft • Accommodate static initial misalignment • Long service life • Reduced noise and vibration levels |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.