SKF · mounted bearings
SKF TKV 56
Bearing housing accessories — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Outside diameter | 466 mm |
|---|---|
| Inside diameter | 260 mm |
| Accessory type | Housing seal |
| Sealing type | Taconite |
| Material | Cast iron with nitrile rubber elements |
| Coating | Zinc-phosphated |
| Product net weight | 22 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
| Corrosion protection | Zinc-phosphated |
| Dimensions · Shaft diameter · (d_a) | 260 mm |
| Dimensions · Outside diameter · (D) | 466 mm |
| Dimensions · Diameter of side face · (D_1) | 280 mm |
| Dimensions · Width of step · (b) | 14.5 mm |
| Dimensions · Distance to side face · (c) | 35 mm |
| Mounting information · Variation of axial alignment · (V_x) | 0.66 mm |
| Mounting information · Radial gap · (Y) | 2 mm |
| Mounting information · Variation of radial gap · (V_y) | 0.59 mm |
| Mounting information · Recommended tightening torque for set screw | 15 N·m |
| Mounting information · Attachment bolt size | M10 |
| Mounting information · Tightening torque for attachment bolts | 44 N·m |
| Mounting information · Grease quantity | 215 g |
| Included products · V-ring | 300 VA R |
| Included products · O-ring | OR 260X6.5 |
| Included products · Quad ring | 1/4 ID X 1/2 OD X 1/8 CS |
| Included products · Set screw | ISO 4029-M10x10-45H PLAIN |
| Included products · Attachment bolt | ISO 4017 M10x25 8.8 PLAIN |
| Included products · Washer | ISO 7089-10-200 HV PLAIN |
Family specifications and selection conditions
| Product description | These taconite seals consist of two rings (one stationary and one rotating), which form a very narrow labyrinth that prevents ingress of solid and liquid contaminants, even during high-pressure washdowns. The rotating labyrinth ring carries a V-ring seal that blocks contaminants from entering the bearing housing and aids the purging of contamination and old grease when the seal is relubricated. The seal is supplied with attachment bolts and washers. |
|---|---|
| Manufacturer features | Minimized assembly width • Excellent exclusion of contaminants • Longer bearing and seal service life • Reduced grease consumption |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.