SKF · maintenance products
SKF TIH L44MB/MV
Induction heaters — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Operating area width | 465 mm |
|---|---|
| Standard yokes for minimal workpiece bore diameter | 150 mm |
| Optional yokes for minimal workpiece bore diameter | 100 mm |
| Dimensions (W x L x H) | 600 x 1200 x 850 mm |
| Heating performance example (bearing, weight, temperature, time) | 24188ECA/W33, 450 kg, 110 °C, 13 min |
| Recommended applications | Fans and blowers;Compressors;Roller conveyors;Bearing houses;Gear boxes;Electrical motors;Pump installations;Engines |
| Type | Induction heater, workshop floor |
| Series | TIH L44 |
| Version | MB |
| Heating method | Induction, low frequency |
| Suitable for mounting | Yes |
| Suitable for dismounting | No |
| Solid workpiece weight (max, mounting) | 300 kg |
| Bearing weight (max) | 600 kg |
| Workpiece bore diameter (mounting) | [object Object] mm |
| Workpiece outer diameter | [object Object] mm |
| Power consumption (max) | 23 kVA |
| Workpiece width (max) | 465 mm |
| Workpiece cross section height (max) | 492 mm |
| Operating area height | 492 mm |
| Coil diameter | 175 mm |
| Main yoke type | Sliding yoke, 100 x 100 mm |
| Yoke storage | No |
| Voltage | 400-460 V |
| Voltage frequency | 50 / 60 Hz |
| Current (max) | 50 A |
| Temperature measurement | Magnetic probe K-type |
| Number of temperature sensors | 1 |
| Demagnetisation after heating | Yes |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Bearing support arms | Yes, removeable |
| Display | 7 segment LED display |
| Forced air cooling | Yes |
| Power setting | 50%, 100% |
| Thermometer mode | Yes |
| Time mode | Yes |
| Remote control panel (wired) | Yes, with LED display |
| Heating time control | [object Object] s |
| Heating time steps | 6 s |
| Heating temperature control | [object Object] °C |
| Heating temperature steps | 1 °C |
| Housing material | Steel; Glass fibre filled polyamide |
| Colour | Grey;Black |
| Content | Heater, Remote control, Temperature probe (TIH P20), 2 standard yokes (TIH L44-Y15), 1 pair of heat resistant gloves (TMBA G11) and 1 tube of anti fretting paste (LAGF 3E/0.035) |
| Country of Manufacturing (COM code) | 16 - Netherlands |
| Product net weight | 276 kg |
| eClass code | 23-05-19-01 |
| UNSPSC code | 40101831 |
Family specifications and selection conditions
| Product description | The SKF TIH L44MB is a very large induction heater and is designed for the fast heating of heavy components such as rings, gears, couplings or similar ring-shaped metal workpieces. This heater is characterized by a high heating performance for heavy solid components. The sliding yoke supports an ergonomic workflow and the heater can easily be transported by forklift. The TIH L44MB can heat workpieces with a minimum bore diameter of 150 mm and with a maximum weight of 600 kg. |
|---|---|
| Manufacturer features | Standard sliding yoke for ergonomic operation • Special design for fast heating of large gears, wheels, rings, couplings and similar workpieces • Easy and safe to use with automatic temperature control or time controlled heating • Automatic demagnetization reduces risk of bearing contamination • Automatic temperature hold function to keep the bearing hot after completion of the heating cycle |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.