SKF · maintenance products
SKF TIH L44/MV
Induction heaters — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Operating area width | 425 mm |
|---|---|
| Standard yokes for minimal workpiece bore diameter | 150 mm |
| Optional yokes for minimal workpiece bore diameter | 100 mm |
| Dimensions (W x L x H) | 600 x 1200 x 850 mm |
| Heating performance example (bearing, weight, temperature, time) | 24188ECA/W33, 450 kg, 110 °C, 13 min |
| Recommended applications | Fans and blowers;Compressors;Roller conveyors;Bearing houses;Gear boxes;Electrical motors;Pump installations;Engines |
| Type | Induction heater, workshop floor |
| Series | TIH L44 |
| Heating method | Induction, low frequency |
| Suitable for mounting | Yes |
| Suitable for dismounting | No |
| Solid workpiece weight (max, mounting) | 600 kg |
| Bearing weight (max) | 1200 kg |
| Workpiece bore diameter (mounting) | [object Object] mm |
| Workpiece outer diameter | [object Object] mm |
| Power consumption (max) | 23 kVA |
| Workpiece width (max) | 425 mm |
| Workpiece cross section height (max) | 492 mm |
| Operating area height | 492 mm |
| Coil diameter | 175 mm |
| Main yoke type | Sliding yoke, 100 x 100 mm |
| Yoke storage | No |
| Voltage | 400-460 V |
| Voltage frequency | 50 / 60 Hz |
| Current (max) | 50 A |
| Temperature measurement | Magnetic probe K-type |
| Number of temperature sensors | 1 |
| Demagnetisation after heating | Yes |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Bearing support arms | Yes, removeable |
| Display | 7 segment LED display |
| Forced air cooling | Yes |
| Power setting | 50%, 100% |
| Thermometer mode | Yes |
| Time mode | Yes |
| Remote control panel (wired) | Yes, with LED display |
| Heating time control | [object Object] s |
| Heating time steps | 6 s |
| Heating temperature control | [object Object] °C |
| Heating temperature steps | 1 °C |
| Housing material | Steel; Glass fibre filled polyamide |
| Colour | Grey;Black |
| Content | Heater, Remote control, Temperature probe (TIH P20), 2 standard yokes (TIH L44-Y15), 1 pair of heat resistant gloves (TMBA G11) and 1 tube of anti fretting paste (LAGF 3E/0.035) |
| Country of Manufacturing (COM code) | 16 - Netherlands |
| Product net weight | 289 kg |
| eClass code | 23-05-19-01 |
| UNSPSC code | 40101831 |
Family specifications and selection conditions
| Product description | The SKF TIH L44 is a very large induction heater and is designed for the hot mounting of bearings. This heater is characterized by a high heating performance for large bearings and a flexible design that allows bearing heating in either the horizontal or vertical position. The sliding yoke supports an ergonomic workflow and the heater can easily be transported by forklift. The TIH L44 can heat bearings with a minimum bore diameter of 150 mm and larger bearings with a maximum weight of 1200 kg. |
|---|---|
| Manufacturer features | Standard sliding yoke for ergonomic operation • Designed for bearing heating in horizontal position (around the coil) or vertical position (around the sliding yoke) • Easy and safe to use with automatic temperature control or time controlled heating • Automatic demagnetization reduces risk of bearing contamination • Automatic temperature hold function to keep the bearing hot after completion of the heating cycle |


Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.