SKF · maintenance products
SKF TIH 220M/LV
Induction heaters — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Operating area width | 250 mm |
|---|---|
| Standard yokes for minimal workpiece bore diameter | 60, 100 mm |
| Optional yokes for minimal workpiece bore diameter | 40 mm |
| Dimensions (W x L x H) | 290 x 750 x 440 mm |
| Heating performance example (bearing, weight, temperature, time) | 23172 CC/W33, 220 kg, 110 °C, 20 min |
| Recommended applications | Fans and blowers;Compressors;Roller conveyors;Bearing houses;Gear boxes;Electrical motors;Pump installations;Engines |
| Type | Induction heater, workshop floor |
| Series | TIH 220m |
| Heating method | Induction, low frequency |
| Suitable for mounting | Yes |
| Suitable for dismounting | No |
| Solid workpiece weight (max, mounting) | 150 kg |
| Bearing weight (max) | 300 kg |
| Workpiece bore diameter (mounting) | [object Object] mm |
| Workpiece outer diameter | [object Object] mm |
| Power consumption (max) | 11.5 kVA |
| Workpiece width (max) | 250 mm |
| Workpiece cross section height (max) | 255 mm |
| Operating area height | 255 mm |
| Coil diameter | 140 mm |
| Main yoke type | Sliding yoke, 70 x 70 mm |
| Yoke storage | Yes, internal |
| Voltage | 200-240 V |
| Voltage frequency | 50 / 60 Hz |
| Current (max) | 50 A |
| Temperature measurement | Magnetic probe K-type |
| Number of temperature sensors | 1 |
| Demagnetisation after heating | Yes |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Bearing support arms | Yes, foldable |
| Display | 7 segment LED display |
| Forced air cooling | No |
| Power setting | 50%, 100% |
| Thermometer mode | Yes |
| Time mode | Yes |
| Remote control panel (wired) | Yes, with LED display |
| Heating time control | [object Object] s |
| Heating time steps | 6 s |
| Heating temperature control | [object Object] °C |
| Heating temperature steps | 1 °C |
| Housing material | Steel; Glass fibre filled polyamide |
| Colour | Grey;Black |
| Content | Heater, Remote control, Temperature probe (TIH P20), 2 standard yokes (TIH 220-Y6, TIH 220-Y10), 1 pair of heat resistant gloves (TMBA G11), 1 tube of anti fretting paste (LAGF 3E/0.035) and 1 shucko plug |
| Country of Manufacturing (COM code) | 16 - Netherlands |
| Product net weight | 86.5 kg |
| eClass code | 23-05-19-01 |
| UNSPSC code | 40101831 |
Family specifications and selection conditions
| Product description | The SKF TIH 220M is a large induction heater and is designed for the hot mounting of bearings. This versatile heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater has a convenient sliding yoke and is supplied with an additional smaller yoke. The TIH 220M can heat bearings with a minimum bore diameter of 60 mm and larger bearings with a maximum weight of 300 kg. |
|---|---|
| Manufacturer features | Supplied with standard sliding yoke and one smaller yoke located in an integrated storage compartment • Easy and safe to use with automatic temperature control or time controlled heating • Automatic demagnetization reduces risk of bearing contamination • Suitable for non-bearing applications for workpieces weighing up to 150 kg • Automatic temperature hold function to keep the bearing hot after completion of the heating cycle |


Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.