SKF · mounted bearings
SKF SDVD 3164
Bearing housings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Diameter of bearing seat | 540 mm |
|---|---|
| Width of bearing seat | 196 mm |
| Centre height (pillow block) | 320 mm |
| Centre distance between bolt holes | 750 mm |
| Centre distance between bolt holes (axial direction) | 200 mm |
| Attachment bolt diameter | 36 mm |
| Housing type | Plummer/pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 4 |
| Material, housing | Spheroidal graphite cast iron |
| Bearing housing seal type | Without |
| Housing lubrication feature/possibility | Grease |
| Product net weight | 259 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
| Dimensions · Bearing seat · Shaft diameter · (d_a) | 300 mm |
| Dimensions · Bearing seat · Diameter of bearing seat · (D_a) | 540 mm |
| Dimensions · Bearing seat · Tolerance class of bearing seat diameter | G7 |
| Dimensions · Bearing seat · Width of bearing seat · (C_a) | 196 mm |
| Dimensions · Bearing seat · Centre height of bearing seat · (H_1) | 320 mm |
| Dimensions · Width across seals · Width centre line to inboard seal · (A_2) | 191 mm |
| Dimensions · Width across seals · Width centre line to outboard seal · (A_3) | 201 mm |
| Dimensions · Width across seals · Width centre line to end cover · (A_4) | 180 mm |
| Dimensions · Outside dimensions · Foot width · (A_1) | 300 mm |
| Dimensions · Outside dimensions · Thread of relubrication hole · (G_1) | 1/4 BSP |
| Dimensions · Outside dimensions · Thread for sensor · (G_3) | 1/4-28 UNF |
| Dimensions · Outside dimensions · Overall height · (H) | 625 mm |
| Dimensions · Outside dimensions · Foot height · (H_2) | 115 mm |
| Dimensions · Outside dimensions · Distance between attachment bolts · (J) | 750 mm |
| Dimensions · Outside dimensions · Axial distance between attachment bolts · (J_1) | 200 mm |
| Dimensions · Outside dimensions · Overall length · (L) | 880 mm |
| Dimensions · Outside dimensions · Length of attachment bolt hole · (N) | 50 mm |
| Dimensions · Outside dimensions · Width of attachment bolt hole · (N_1) | 42 mm |
| Dimensions · Outside dimensions · Offset of bearing axis · (s) | 23 mm |
| Dimensions · Outside dimensions · Length of shaft end · (X) · min. | 126 mm |
| Dimensions · Outside dimensions · Length of shaft end · (X) · max. | 150 mm |
| Safe loads · Safe load at 0° load angle (if the housing is not supported over its entire base) · (P_0°) | 1860 kN |
| Safe loads · Safe load at 55° load angle · (P_55°) | 2270 kN |
| Safe loads · Safe load at 90° load angle · (P_90°) | 1500 kN |
| Safe loads · Safe load at 120° load angle · (P_120°) | 1050 kN |
| Safe loads · Safe load at 150° load angle · (P_150°) | 960 kN |
| Safe loads · Safe load at 180° load angle · (P_180°) | 1710 kN |
| Safe loads · Safe load, axial · (P_a) | 550 kN |
| Materials · Housing | Spheroidal graphite cast iron |
| Materials · Corrosion protection | Paint - in accordance with ISO 12944-2, corrosivity category C2 |
| Mounting information · Recommended diameter of attachment bolts · (G) | 36 mm |
| Mounting information · Recommended tightening torque for attachment bolts | 2280 N·m |
| Mounting information · Size of cap bolts | M30 |
| Mounting information · Tightening torque for cap bolts | 400 N·m |
| Mounting information · Size of seal/end cover bolts | M10 |
| Mounting information · Size of eye bolt | M24 |
| Mounting information · Initial grease fill, 20% | 3350 g |
| Mounting information · Initial grease fill, 40% | 6700 g |
| Mounting information · Initial grease fill, 80% | 13400 g |
| Mounting information · Plug for relubication holes | 1/4 BSP ASME 16.11 |
| Mounting information · Grease fitting | DIN 71412 A STR R 1/4 |
Family specifications and selection conditions
| Product description | SDVD housings have been designed for the demands of conveyor pulleys in the mining industry, where taconite seals are required for excluding contaminants. They accommodate bolt-on seals (TKV series) and end covers simplifying in-situ bearing replacements. On delivery, relubrication holes are plugged and grease fittings are included. |
|---|---|
| Manufacturer features | Minimized assembly width • Maximum service life for the incorporated bearing • Interface dimensions compatible with market standards (ISO 113) • Threaded holes to connect condition monitoring sensors as standard • Bolt-on seals and end covers enable in-situ bearing replacements |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.