SKF · plain bearings
SKF SALKAC 20 M
Rod ends — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter, bearing inner ring | 20 mm |
|---|---|
| Outside diameter, housing eye | 51 mm |
| Width, bearing inner ring | 25 mm |
| Thread designation | M 20x1.5 |
| Width, housing eye | 18.5 mm |
| Centre height, housing (from end of shank) | 78 mm |
| Housing length, total | 106 mm |
| Basic dynamic load rating | 31.5 kN |
| Basic static load rating | 29 kN |
| Sliding contact surface combination | Steel/bronze |
| Material, housing | Steel |
| Material, inner ring | Bearing steel |
| Maintenance | Relubrication required |
| Attachment feature, rod end shank | Left-hand male thread |
| Sealing | Without |
| Product net weight | 0.358 kg |
| eClass code | 23-05-01-05 |
| UNSPSC code | 31171508 |
| Dimensions · Bore diameter · (d) | 20 mm |
| Dimensions · Diameter head · (d_2) · max. | 51 mm |
| Dimensions · Width inner ring · (B) | 25 mm |
| Dimensions · Thread · (G) | M 20x1.5 |
| Dimensions · Width head · (C_1) · max. | 18.5 mm |
| Dimensions · Height shank end face - centre rod end eye · (h) | 78 mm |
| Dimensions · Angle of tilt · (α) | 14 ° |
| Dimensions · Raceway diameter inner ring · (d_k) | 34.925 mm |
| Dimensions · Length thread · (l_1) · min. | 45 mm |
| Dimensions · Length (height) housing · (l_2) · max. | 106 mm |
| Dimensions · Chamfer dimension bore · (r_1) · min. | 0.3 mm |
| Calculation data · Basic dynamic load rating · (C) | 31.5 kN |
| Calculation data · Basic static load rating · (C_0) | 29 kN |
| Calculation data · Specific dynamic load factor · (K) | 50 N/mm² |
| Calculation data · Material constant · (K_M) | 330 |
Family specifications and selection conditions
| Product description | These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The male thread is available with a left- (prefix SAL) or right-hand thread. |
|---|---|
| Manufacturer features | Suitable where lubricant starvation might occur • Simple and ready-to-mount • Easy to relubricate (sizes ≥ 6) |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.