SKF · mounted bearings
SKF SAFS 515
Bearing housings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Diameter of bearing seat | 130 mm |
|---|---|
| Centre height (pillow block) | 82.55 mm |
| Centre distance between bolt holes | 231.775 mm |
| Attachment bolt diameter | 15.875 mm |
| Housing type | Pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 2 |
| Material, housing | Cast steel |
| Bearing housing seal type | Labyrinth |
| Housing lubrication feature/possibility | Grease/Oil |
| Product net weight | 12.6 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
| Dimensions · Shaft · Shaft diameter · (d_a) | 61.913 mm |
| Dimensions · Bearing seat · Diameter of bearing seat · (D_a) | 130 mm |
| Dimensions · Bearing seat · Tolerance class of bearing seat diameter | G7 |
| Dimensions · Bearing seat · Width of bearing seat · (C_a) | 37.008 mm |
| Dimensions · Bearing seat · Centre height · (H_1) | 82.55 mm |
| Dimensions · Outside dimensions · Foot width · (A_1) | 79.375 mm |
| Dimensions · Outside dimensions · Overall width · (A_2) | 120.65 mm |
| Dimensions · Outside dimensions · Overall height · (H) | 161.925 mm |
| Dimensions · Outside dimensions · Foot height · (H_2) | 30.163 mm |
| Dimensions · Outside dimensions · Distance between attachment bolts · (J) · min. | 219.075 mm |
| Dimensions · Outside dimensions · Distance between attachment bolts · (J) · max. | 244.475 mm |
| Dimensions · Outside dimensions · Distance between attachment bolts, axial · (J_1) | 47.625 mm |
| Dimensions · Outside dimensions · Overall length · (L) | 285.75 mm |
| Dimensions · Outside dimensions · Width of attachment bolt hole · (N_1) | 19.05 mm |
| Dimensions · Threaded holes · Distance of drain plug from centre · (R_1) | 46.038 mm |
| Dimensions · Threaded holes · Height of drain plug position · (R_2) | 21.431 mm |
| Dimensions · Threaded holes · Thread of drain hole · (R_G) | 1/4-18 NPT |
| Dimensions · Threaded holes · Thread of grease fitting in cap · (P_G) | 1/8-27 NPT |
| Recommended safe loads · Safe load at 60° load angle · (P_60°) | 104 kN |
| Recommended safe loads · Safe load at 90° load angle · (P_90°) | 59.6 kN |
| Recommended safe loads · Safe load at 120° load angle · (P_120°) | 36.9 kN |
| Recommended safe loads · Safe load at 150° load angle · (P_150°) | 33.4 kN |
| Recommended safe loads · Safe load at 180° load angle · (P_180°) | 40 kN |
| Recommended safe loads · Safe load, axial · (P_a) | 26 kN |
| Materials · Housing material | Cast steel |
| Materials · Corrosion protection | Paint - in accordance with ISO 12944-2, corrosivity category C2 |
| Mounting information · Cap bolt | 1/2-13 UNC x 2-3/4 |
| Mounting information · Number of cap bolts | 2 |
| Mounting information · SAE grade of cap bolt | 8 |
| Mounting information · Recommended tightening torque for cap bolts | 149 N·m |
| Mounting information · Recommended diameter for attachment bolts · (G) | 15.875 mm |
| Mounting information · Width of included locating ring | 5.918 mm |
| Mounting information · Initial grease fill, 20% | 118 g |
| Mounting information · Initial grease fill, 40% | 186 g |
Family specifications and selection conditions
| Product description | SAF split plummer (pillow) block housings have a two-piece, cast metal construction with inch dimensions. These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment. |
|---|---|
| Manufacturer features | Robust design • Customizable configurations • Suitable for tough operating conditions • Cost-effective bearing solution |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.