SKF · industrial seals
SKF RSB4-6500-AD2
Rod and buffer seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Rod diameter | 165.1 mm |
|---|---|
| Housing groove diameter | 186.18 mm |
| Housing groove width | 8.13 mm |
| Pressure limit, maximum | 40 N/mm² |
| Design | RSB |
| Primary sealing element | Polytetrafluoroethylene (PTFE 741) |
| Compound 2 | Nitrile Rubber (NBR A-8504) |
| Unit system | Inch |
| Product net weight | 0.229 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Rod diameter · (d) | 165.1 mm |
| Dimensions · Housing groove diameter · (D) | 186.18 mm |
| Dimensions · Housing groove width · (L) | 8.13 mm |
| Dimensions · Radial depth · (S) | 10.54 mm |
| Dimensions · Groove radius · (R) · max. | 0.89 mm |
| Dimensions · Lead-in chamfer length · (C) · min. | 7.92 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances · Lower limit deviation | -0.13 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.15 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.254 mm |
| Maximum extrusion gap · Reference temperature for extrusion gap | 80 °C |
| Maximum extrusion gap · Extrusion gap at 160 bar · (e) | 0.51 mm |
| Maximum extrusion gap · Extrusion gap at 250 bar · (e) | 0.36 mm |
| Maximum extrusion gap · Extrusion gap at 400 bar · (e) | 0.25 mm |
| Pressure and speed · Pressure · max. | 400 bar |
| Pressure and speed · Speed · max. | 1 m/s |
| Operating temperature · Extreme upper temperature limit · (T_6) | 120 °C |
| Operating temperature · Reduced performance upper temperature limit · (T_5) | 110 °C |
| Operating temperature · Upper operating temperature limit · (T_4) | 100 °C |
| Operating temperature · Lower operating temperature limit · (T_3) | -50 °C |
| Operating temperature · Reduced performance lower temperature limit · (T_2) | -55 °C |
| Operating temperature · Extreme lower temperature limit · (T_1) | -60 °C |
| Operating temperature · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously. |
| Materials · Primary sealing element | Polytetrafluoroethylene (PTFE 741) |
| Materials · Additional element | Nitrile Rubber (NBR A-8504) |
Family specifications and selection conditions
| Product description | These hydraulic buffer seals consist of a PTFE slide ring and a nitrile rubber energizer that keeps the slide ring in its proper position against the rod seal side of the housing. This design ensures that the buffer seal is positioned to handle any pressure spikes that might occur in the hydraulic cylinder. On request, for the most demanding applications of large equipment, SKF can manufacture these with polyamide slide rings for additional extrusion and wear resistance. |
|---|---|
| Manufacturer features | Provides protection for rod seals in applications where conventional buffers are not sufficient • Provides improved gap extrusion resistance at abrupt pressure peaks • Suitable for medium to heavy duty applications • Accommodate pressures up to 400 bar (5 800 psi) • Available in inch sizes |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.