BEARING WORLD

SKF · industrial seals

SKF PA 25X35X7X10

Wiper seals — manufacturer technical reference and quotation support in Saudi Arabia.

Product directory / SKF

Request a quote for this productTalk to Bearing World

لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.

Manufacturer-listed technical specifications
Rod diameter25 mm
Housing groove bore diameter35 mm
Housing groove width7.5 mm
Bore typeMetal-cased press-in wiper seal
DesignPA
Sealing lip materialPolyurethane (TPU W93)
Product net weight0.0105 kg
eClass code23-07-01-90
UNSPSC code31181602
Dimensions · Rod diameter · (d)25 mm
Dimensions · Housing groove diameter · (D)35 mm
Dimensions · Housing groove width · (L)7.5 mm
Dimensions · Radial depth · (S)5 mm
Dimensions · Groove radius · (R) · max.0.8 mm
Dimensions · Lead-in chamfer length on rod · (C) · min.4 mm
Dimensions · Lead-in chamfer length in housing · (C_1) · min.0.7 mm
Dimensions · Lead-in chamfer length in housing · (C_1) · max.1 mm
Dimensions · Seal width in housing · (H)7 mm
Dimensions · Total seal width · (H_2)10 mm
Dimensions · Tolerances · Dimension · (tol d)Tolerance for rod diameter is determined by the rod seal.
Dimensions · Tolerances · Upper limit deviation · (tol D)0.039 mm
Dimensions · Tolerances · Lower limit deviation0 mm
Dimensions · Tolerances · Tolerance class for housing diameterH8
Dimensions · Tolerances · Upper limit deviation · (tol L)0.5 mm
Materials · Primary sealing elementPolyurethane (TPU W93)
Operating conditions · Speed · max.1 m/s
Operating conditions · Temperature · min.-40 °C
Operating conditions · Temperature · max.110 °C
Operating conditions · DimensionMaximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously.
Compliance with standard · In accordance withISO 6195-B

Family specifications and selection conditions

Manufacturer-listed technical specifications
Product descriptionHydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. PA seals are polyurethane press-in wiper seals with a steel retaining ring. They have an effective, single wiping lip that protrudes from the cylinder head. This design allows small radial cross sections and reduces the risk of contaminant adherence on the wiper lip.
Manufacturer featuresAllow small radial cross sections • Reduce the risk of contaminant adherence on the wiper lip • Available in metric sizes • If not in stock, alternatives can be produced by SKF SEAL JET systems

Manufacturer references

Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.

Explore SKF at Bearing World