SKF · mounted bearings
SKF P4BE 415-SRB-SRH
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 125.4 mm |
|---|---|
| Centre height (pillow block) | 139.7 mm |
| Housing overall width | 130.175 mm |
| Centre distance between bolt holes | 398.463 mm |
| Attachment bolt diameter | 22.225 mm |
| Bearing width, total | 168.275 mm |
| Basic dynamic load rating | 547 kN |
| Basic static load rating | 801 kN |
| Limiting speed | 1650 r/min |
| Unit system | Inch |
| Housing type | Pillow block |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Set screws |
| Bearing position | Locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 45.5 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | Set screws |
| Dimensions · Shaft diameter · (d_a) | 125.4 mm |
| Dimensions · Collar outer diameter · (d_2) | 174.625 mm |
| Dimensions · Housing foot width · (A) | 130.175 mm |
| Dimensions · Width including end cover · (A_5) | 181.372 mm |
| Dimensions · Width of bearing including locking mechanism · (B) | 168.275 mm |
| Dimensions · Height base to center · (H) | 139.7 mm |
| Dimensions · Housing foot height · (H_1) | 79.375 mm |
| Dimensions · Housing height · (H_2) | 280.988 mm |
| Dimensions · Distance of attachment bolts, min. · (J) · min. | 384.175 mm |
| Dimensions · Distance of attachment bolts, max. · (J) · max. | 412.75 mm |
| Dimensions · Distance of attachment bolts · (J) | 398.463 mm |
| Dimensions · Axial distance bolt to bolt · (J_1) | 69.85 mm |
| Dimensions · Housing length · (L) | 469.9 mm |
| Dimensions · Width of attachment bolt hole · (N) | 25.4 mm |
| Dimensions · Length of attachment bolt hole · (N_1) | 39.688 mm |
| Dimensions · Centre line unit to side face of inner ring · (s) | 84.138 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-18 NPT |
| Calculation data · Basic dynamic load rating · (C) | 547 kN |
| Calculation data · Basic static load rating · (C_0) | 801 kN |
| Calculation data · Fatigue load limit · (P_u) | 77.8 kN |
| Calculation data · Limiting speed | 1650 r/min |
| Calculation data · Limiting value · (e) | 0.26 |
| Calculation data · Calculation factor · (Y_1) | 2.6 |
| Calculation data · Calculation factor · (Y_2) | 3.9 |
| Calculation data · Calculation factor · (Y_0) | 2.5 |
| Calculation data · Bearing mean diameter · (d_m) | 180.086 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 10.7 kN |
| Mounting information · Attachment bolt diameter · (G) | 0.875 in |
| Mounting information · Set screws | 5/8"-18 UNF-2A x 7/8" |
| Mounting information · Number of set screws | 4 |
| Mounting information · Tightening torque for set screws | 150 N·m |
| Mounting information · Grease quantity for relubrication | 28 g |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Pillow (plummer) block units can support rotating shafts while standing on a flat surface, or hanging on a wall or ceiling. Locking on the shaft by set screws is easy and reliable. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick mounting on the support surface, quick locking on the shaft |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.