SKF · mounted bearings
SKF P4BA 307-SRB-TRH
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 87.313 mm |
|---|---|
| Centre height (pillow block) | 114.3 mm |
| Housing overall width | 111.125 mm |
| Width, total | 122.238 mm |
| Centre distance between bolt holes | 314.325 mm |
| Attachment bolt diameter | 19.05 mm |
| Basic dynamic load rating | 331 kN |
| Basic static load rating | 375 kN |
| Limiting speed | 1900 r/min |
| Unit system | Inch |
| Housing type | Pillow block |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Tapered locking |
| Bearing position | Locating |
| Bore type | Tapered |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 22.9 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171511 |
| Metric/inch series | Inch |
| Locking method | Tapered locking |
| Dimensions · Shaft diameter · (d_a) | 87.313 mm |
| Dimensions · Collar outer diameter · (d_2) | 135 mm |
| Dimensions · Housing foot width · (A) | 111.125 mm |
| Dimensions · Width including end cover · (A_5) | 142.875 mm |
| Dimensions · Width of bearing including locking mechanism · (B) | 104.775 mm |
| Dimensions · Height base to center · (H) | 114.3 mm |
| Dimensions · Housing foot height · (H_1) | 44.45 mm |
| Dimensions · Housing height · (H_2) | 217.488 mm |
| Dimensions · Distance of attachment bolts, min. · (J) · min. | 295.275 mm |
| Dimensions · Distance of attachment bolts, max. · (J) · max. | 333.375 mm |
| Dimensions · Distance of attachment bolts · (J) | 314.325 mm |
| Dimensions · Axial distance bolt to bolt · (J_1) | 60.325 mm |
| Dimensions · Housing length · (L) | 387.35 mm |
| Dimensions · Width of attachment bolt hole · (N) | 20.638 mm |
| Dimensions · Length of attachment bolt hole · (N_1) | 39.688 mm |
| Dimensions · Centre line unit to side face of inner ring · (s) | 38.1 mm |
| Dimensions · Total width · (T) | 122.238 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-18 NPT |
| Calculation data · Basic dynamic load rating · (C) | 331 kN |
| Calculation data · Basic static load rating · (C_0) | 375 kN |
| Calculation data · Fatigue load limit · (P_u) | 39 kN |
| Calculation data · Limiting speed | 1900 r/min |
| Calculation data · Limiting value · (e) | 0.24 |
| Calculation data · Calculation factor · (Y_1) | 2.8 |
| Calculation data · Calculation factor · (Y_2) | 4.2 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 124.968 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 34.9 kN |
| Mounting information · Attachment bolt diameter · (G) | 0.75 in |
| Mounting information · Set screws | M6-1 x 16mm |
| Mounting information · Number of set screws | 2 |
| Mounting information · Tightening torque for set screws | 7 N·m |
| Mounting information · Grease for relubrication | LGEP 2 |
| Mounting information · Grease quantity for relubrication | 13 g |
Family specifications and selection conditions
| Product description | Pillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface. The units are sealed and lubricated and ready to use. This assortment of units covers a wide range of requirements, in metric and inch dimensions. |
|---|---|
| Manufacturer features | Ready to mount • Factory lubricated and sealed • Quick locking on the shaft • Long service life • Easy to replace |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.