SKF · mounted bearings
SKF P2BT 100-FM
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 25.4 mm |
|---|---|
| Centre height (pillow block) | 36.5 mm |
| Housing overall width | 38.1 mm |
| Centre distance between bolt holes | 50.8 mm |
| Bearing width, total | 31 mm |
| Basic dynamic load rating | 14 kN |
| Basic static load rating | 7.8 kN |
| Limiting speed | 7000 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Pillow block, short base |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Threaded |
| Retaining feature, inner ring | Eccentric collar |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Inch |
| Product net weight | 0.547 kg |
| eClass code | 23-05-16-01 |
| UNSPSC code | 31171536 |
| Compliance with standard | North American standard |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 25.4 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 33.74 mm |
| Dimensions · Outside diameter of locking ring · (d_2) | 37.4 mm |
| Dimensions · Base width · (A) | 38.1 mm |
| Dimensions · Top width · (A_1) | 22.8 mm |
| Dimensions · Overall bearing width · (B_1) | 31 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 4.75 mm |
| Dimensions · Height of spherical seat centre · (H) | 36.5 mm |
| Dimensions · Foot height · (H_1) | 11.9 mm |
| Dimensions · Overall height · (H_2) | 71.4 mm |
| Dimensions · Centre distance between bolt holes · (J) | 50.8 mm |
| Dimensions · Overall length · (L) | 76.2 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 23.5 mm |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/8-27 NPT |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 0.3 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 45 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.579 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 11.113 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 14 kN |
| Calculation data · Basic static load rating · (C_0) | 7.8 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.335 kN |
| Calculation data · Limiting speed | 7000 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Thread for attachment bolts · (G) | 3/8-16 UNC |
| Mounting information · Thread length · (G_1) | 12.7 mm |
| Mounting information · Set screw · (G_2) | 1/4-28 UNF |
| Mounting information · Hexagonal key size for set screw | 3.175 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
Family specifications and selection conditions
| Product description | Pillow (plummer) block bearing units consisting of an insert bearing mounted in a composite or cast metal housing that can be bolted to a support surface. In addition to being part of a unit, some pillow block housings for insert bearings are available as separate components. The SKF assortment includes units that are compliant with several industrial standards and meet many requirements. |
|---|---|
| Manufacturer features | Ready to mount • Lubricated and sealed bearings • Quick locking on the shaft • Large variety of housing shapes, housing materials, and locking methods • Concentric locking options for high speeds and low vibration |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.