SKF · mounted bearings
SKF P2B 25M-FM
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 25 mm |
|---|---|
| Centre height (pillow block) | 36.51 mm |
| Housing overall width | 38.1 mm |
| Centre distance between bolt holes | 104.78 mm |
| Bearing width, total | 31 mm |
| Attachment bolt diameter | 10 mm |
| Basic dynamic load rating | 14 kN |
| Basic static load rating | 7.8 kN |
| Limiting speed | 7000 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Pillow block, normal base |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Eccentric collar |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Metric |
| Product net weight | 0.736 kg |
| eClass code | 23-05-16-01 |
| UNSPSC code | 31171536 |
| Compliance with standard | North American standard |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 25 mm |
| Dimensions · Shoulder diameter of inner ring · (d_1) · ≈ | 33.74 mm |
| Dimensions · Outside diameter of locking ring · (d_2) | 37.4 mm |
| Dimensions · Base width · (A) | 38.1 mm |
| Dimensions · Top width · (A_1) | 22.6 mm |
| Dimensions · Overall bearing width · (B_1) | 31 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 4.75 mm |
| Dimensions · Height of spherical seat centre · (H) | 36.51 mm |
| Dimensions · Foot height · (H_1) | 15.88 mm |
| Dimensions · Overall height · (H_2) | 70.64 mm |
| Dimensions · Distance between attachment bolts · (J) | 104.78 mm |
| Dimensions · Maximum distance between attachment bolts · (J) · max. | 111.13 mm |
| Dimensions · Minimum distance between attachment bolts · (J) · min. | 98.43 mm |
| Dimensions · Overall length · (L) | 139.7 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 12.7 mm |
| Dimensions · Length of attachment bolt hole · (N_1) | 19.05 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 23.5 mm |
| Dimensions · Threaded hole · Housing thread for the grease fitting · (R_G) | 1/8-27 NPT |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 0.3 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 45 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.579 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 11.113 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 14 kN |
| Calculation data · Basic static load rating · (C_0) | 7.8 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.335 kN |
| Calculation data · Limiting speed | 7000 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | M6x0.75 |
| Mounting information · Hexagonal key size for set screw | 3 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 10 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.375 in |
Family specifications and selection conditions
| Product description | Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is intended for applications where the direction of rotation is constant. It has a narrow inner ring extended on one side and is locked onto the shaft by an eccentric locking collar, making it easy to mount. The units are compliant with North American standards. |
|---|---|
| Manufacturer features | Standard centre height • Ready to mount • Lubricated and sealed bearing • Quick locking onto the shaft • Narrow inner ring for tight operating spaces |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.