SKF · industrial seals
SKF LTP-433-E3R
Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Cylinder bore diameter | 152.45 mm |
|---|---|
| Piston groove diameter | 140.41 mm |
| Piston groove width | 9.53 mm |
| Pressure limit, maximum | 34 N/mm² |
| Design | LTP |
| Primary sealing element | Nitrile Rubber (NBR A-8501) |
| Compound 2 | Polyamide (PA P-2506) |
| Unit system | Inch |
| Product net weight | 0.022 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Cylinder bore diameter · (D) | 152.45 mm |
| Dimensions · Piston groove diameter · (d) | 140.41 mm |
| Dimensions · Piston groove width · (L) | 9.53 mm |
| Dimensions · Radial depth · (S) | 6.02 mm |
| Dimensions · Groove radius · (R) · max. | 0.81 mm |
| Dimensions · Lead-in chamfer length · (C) · min. | 4.75 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.05 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances · Lower limit deviation | -0.1 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.127 mm |
| Maximum extrusion gap · Reference temperature for extrusion gap | 80 °C |
| Maximum extrusion gap · Extrusion gap at 70 bar · (e) | 0.89 mm |
| Maximum extrusion gap · Extrusion gap at 210 bar · (e) | 0.43 mm |
| Maximum extrusion gap · Extrusion gap at 340 bar · (e) | 0.25 mm |
| Pressure and speed · Pressure · max. | 340 bar |
| Pressure and speed · Speed at pressure ≤ 250 bar | 1 m/s |
| Pressure and speed · Speed at pressure ≤ 340 bar | 0.5 m/s |
| Operating temperature · Extreme upper temperature limit · (T_6) · max. | 120 °C |
| Operating temperature · Reduced performance upper temperature limit · (T_5) · max. | 110 °C |
| Operating temperature · Upper operating temperature limit · (T_4) · max. | 100 °C |
| Operating temperature · Lower operating temperature limit · (T_3) · min. | -25 °C |
| Operating temperature · Reduced performance lower temperature limit · (T_2) · min. | -30 °C |
| Operating temperature · Extreme lower temperature limit · (T_1) · min. | -40 °C |
| Operating temperature · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. |
| Materials · Primary sealing element | Nitrile Rubber (NBR A-8501) |
| Materials · Additional element | Polyamide (PA P-2506) |
Family specifications and selection conditions
| Product description | LTP seals are double-acting piston seals with a nitrile rubber sealing ring and polyamide anti-extrusion rings on both sides. The anti-extrusion rings provide improved high pressure performance by reducing the likelihood of gap extrusion. The anti-extrusion rings are split for easy installation and their locking design reduces assembly issues. |
|---|---|
| Manufacturer features | Very good sealing performance • Good extrusion gap and pressure capability • Suitable for medium to heavy duty applications • Available in inch sizes to fit O-ring dash-number seal housings • If not in stock alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.