SKF · industrial seals
SKF LPV 50X39X4.2
Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Cylinder bore diameter | 50 mm |
|---|---|
| Piston groove diameter | 39 mm |
| Piston groove width | 4.2 mm |
| Pressure limit, maximum | 25 N/mm² |
| Design | LPV |
| Primary sealing element | Polyurethane (ECOPUR PT 54D) |
| Compound 2 | Nitrile Rubber (NBR N70/6052) |
| Unit system | Metric |
| Product net weight | 0.0035 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Cylinder bore diameter · (D) | 50 mm |
| Dimensions · Piston groove diameter · (d) | 39 mm |
| Dimensions · Piston groove width · (L) | 4.2 mm |
| Dimensions · Radial depth · (S) | 5.5 mm |
| Dimensions · Groove radius · (R) · max. | 0.5 mm |
| Dimensions · Lead-in chamfer length · (C) · min. | 4.5 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.062 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Tolerance class for cylinder bore diameter | H9 |
| Dimensions · Tolerances · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances · Lower limit deviation | -0.062 mm |
| Dimensions · Tolerances · Tolerance class for piston groove diameter | h9 |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.2 mm |
| Maximum extrusion gap · Reference temperature for extrusion gap | 80 °C |
| Maximum extrusion gap · Extrusion gap at 160 bar · (e) | 0.4 mm |
| Maximum extrusion gap · Extrusion gap at 250 bar · (e) | 0.25 mm |
| Pressure and speed · Pressure · max. | 250 bar |
| Pressure and speed · Speed · max. | 0.5 m/s |
| Operating temperature · Extreme upper temperature limit · (T_6) · max. | 120 °C |
| Operating temperature · Reduced performance upper temperature limit · (T_5) · max. | 110 °C |
| Operating temperature · Upper operating temperature limit · (T_4) · max. | 100 °C |
| Operating temperature · Lower operating temperature limit · (T_3) · min. | -20 °C |
| Operating temperature · Reduced performance lower temperature limit · (T_2) · min. | -30 °C |
| Operating temperature · Extreme lower temperature limit · (T_1) · min. | -40 °C |
| Operating temperature · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. |
| Materials · Primary sealing element | Polyurethane (ECOPUR PT 54D) |
| Materials · Additional element | Nitrile Rubber (NBR N70/6052) |
| Compliance with standard · In accordance with | ISO 7425-1 |
Family specifications and selection conditions
| Product description | LPV seals are metric sized, double-acting piston seals with a polyurethane slide ring and a nitrile rubber O-ring energizer. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction. These profiles can usually be installed without special equipment. |
|---|---|
| Manufacturer features | Cost-effective sealing solution • Suitable for light to medium duty applications • Available in metric sizes • Fit seal housings in accordance with ISO 7425-1 for some sizes • If not in stock alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.