SKF · rolling bearings
SKF KMT 1
Lock nuts — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Thread designation | M 12x1 |
|---|---|
| Bore diameter | 12 mm |
| Outside diameter | 30 mm |
| Width | 14 mm |
| Locking device | Incorporated in the lock nut |
| Nut for hydraulic mounting | No |
| Associated mounting tool | HN 4 |
| Product net weight | 0.05 kg |
| eClass code | 23-11-07-05 |
| UNSPSC code | 31163218 |
| Dimensions · Thread · (G) | M 12x1 |
| Dimensions · Outside diameter locating side face · (d_1) | 25 mm |
| Dimensions · Width · (B) | 14 mm |
| Dimensions · Outside diameter · (d_3) | 30 mm |
| Dimensions · Inner diameter locating side face · (d_4) | 13 mm |
| Dimensions · Diameter side face opposite to bearing · (d_5) | 23 mm |
| Dimensions · Width flat spanner · (M) | 27 mm |
| Dimensions · Width locating slot · (b) | 4 mm |
| Dimensions · Depth locating slot · (h) | 2 mm |
| Calculation data · Axial static load carrying capacity | 40 kN |
| Mounting information · Associated spanner (Hook spanner in accordance with DIN 1810) | HN 4 |
| Mounting information · Set / Locking screw size | M5 |
| Mounting information · Recommended tightening torque | 4.5 N·m |
Family specifications and selection conditions
| Product description | KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components. Maximum axial run-out between the locating face and thread (up to size 40): 0.005 mm |
|---|---|
| Manufacturer features | No keyway required • Withstands high axial loads • Reliable, effective locking mechanism • Designed for frequent and simple installation and removal • Available for thread M 10x0.75 to M 200x3 (sizes 0 to 40) and Tr 220x4 to Tr 420x5 (sizes 44 to 84) |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.