SKF · thin section bearings
SKF KDN.SAA15AG0
Thin section bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 38.1 mm |
|---|---|
| Outside diameter | 47.625 mm |
| Width | 4.763 mm |
| Radial cross section | 4.763 mm |
| Contact angle | 30 ° |
| Limiting speed | 9330 r/min |
| Basic dynamic load rating | 1.58 kN |
| Basic static load rating | 1.87 kN |
| Rolling bearing type | Angular contact ball bearing (type A) |
| Contact type | Normal contact (two-point contact) |
| Number of rows | 1 |
| Cage | Non-metallic |
| Matched arrangement | No |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing | Without |
| Lubricant | None |
| Relubrication feature | Without |
| Unit system | Inch |
| Indicative carbon footprint for new product | 0.07 kg CO_2e |
| Product net weight | 0.0181 kg |
| eClass code | 23-05-08-07 |
| UNSPSC code | 31171531 |
| Dimensions · Bore diameter · (d) | 38.1 mm |
| Dimensions · Outside diameter · (D) | 47.625 mm |
| Dimensions · Radial cross section · (H) | 4.763 mm |
| Dimensions · Width · (B) | 4.763 mm |
| Dimensions · Shoulder diameter inner ring · (d_1) · ≈ | 41.656 mm |
| Dimensions · Shoulder diameter outer ring · (D_1) · ≈ | 44.069 mm |
| Dimensions · Shoulder diameter outer ring · (D_4) · ≈ | 45.06 mm |
| Dimensions · Ball diameter | 2.381 mm |
| Dimensions · Maximum radius of shaft or housing fillet | 0.381 mm |
| Calculation data · Basic dynamic load rating · (C) | 1.58 kN |
| Calculation data · Basic static load rating · (C_0) | 1.87 kN |
| Calculation data · Limiting speed | 9330 r/min |
Family specifications and selection conditions
| Product description | These angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric and inch boundary dimensions. Depending on the design and series, the bearings can be provided with chemical and corrosion resistance. |
|---|---|
| Manufacturer features | Accommodate radial loads and axial loads in one direction • Thin cross section • Lightweight • Low friction • High stiffness • High running accuracy |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.