SKF · thin section bearings
SKF KDN.JU055XP0K
Thin section bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 139.7 mm |
|---|---|
| Outside diameter | 158.75 mm |
| Width | 12.7 mm |
| Radial cross section | 9.525 mm |
| Contact angle | 30 ° |
| Limiting speed | 450 r/min |
| Basic dynamic load rating | 9.37 kN |
| Basic static load rating | 19.5 kN |
| Rolling bearing type | Four-point contact ball bearing (type X) |
| Contact type | Four-point contact |
| Number of rows | 1 |
| Cage | Brass or non-metallic composite |
| Matched arrangement | No |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Seal on both sides |
| Sealing type | Contact |
| Lubricant | Grease |
| Relubrication feature | Without |
| Unit system | Inch |
| Indicative carbon footprint for new product | 1.3 kg CO_2e |
| Product net weight | 0.34 kg |
| eClass code | 23-05-08-07 |
| UNSPSC code | 31171538 |
| Dimensions · Bore diameter · (d) | 139.7 mm |
| Dimensions · Outside diameter · (D) | 158.75 mm |
| Dimensions · Radial cross section · (H) | 9.525 mm |
| Dimensions · Width · (B) | 12.7 mm |
| Dimensions · Shoulder diameter inner ring · (d_1) · ≈ | 146.736 mm |
| Dimensions · Recess diameter inner ring · (d_2) · ≈ | 143.51 mm |
| Dimensions · Shoulder diameter outer ring · (D_1) · ≈ | 151.714 mm |
| Dimensions · Recess diameter outer ring · (D_2) · ≈ | 153.492 mm |
| Dimensions · Ball diameter | 4.763 mm |
| Dimensions · Maximum radius of shaft or housing fillet | 0.381 mm |
| Calculation data · Basic dynamic load rating · (C) | 9.37 kN |
| Calculation data · Basic static load rating · (C_0) | 19.5 kN |
| Calculation data · Limiting speed | 450 r/min |
Family specifications and selection conditions
| Product description | Four-point contact ball bearings with seals or shields can accommodate radial, axial and moment loads simultaneously. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. The bearings are available with metric and inch boundary dimensions. |
|---|---|
| Manufacturer features | Accommodate radial, axial and moment loads simultaneously • Require considerably less axial space than two angular contact ball bearings • Integral sealing prolongs bearing service life • Thin cross section • Lightweight • Low friction • High stiffness • High running accuracy |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.