SKF · thin section bearings
SKF KDN.JA030CP0J
Thin section bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 76.2 mm |
|---|---|
| Outside diameter | 88.9 mm |
| Width | 6.35 mm |
| Radial cross section | 6.35 mm |
| Contact angle | 0 ° |
| Limiting speed | 2230 r/min |
| Basic dynamic load rating | 2.76 kN |
| Basic static load rating | 3.9 kN |
| Rolling bearing type | Radial contact ball bearing (type C) |
| Contact type | Normal contact (two-point contact) |
| Number of rows | 1 |
| Cage | Brass or non-metallic composite |
| Matched arrangement | No |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Seal on both sides |
| Sealing type | Contact |
| Lubricant | Grease |
| Relubrication feature | Without |
| Unit system | Inch |
| Indicative carbon footprint for new product | 0.22 kg CO_2e |
| Product net weight | 0.06 kg |
| eClass code | 23-05-08-07 |
| UNSPSC code | 31171502 |
| Dimensions · Bore diameter · (d) | 76.2 mm |
| Dimensions · Outside diameter · (D) | 88.9 mm |
| Dimensions · Radial cross section · (H) | 6.35 mm |
| Dimensions · Width · (B) | 6.35 mm |
| Dimensions · Shoulder diameter inner ring · (d_1) · ≈ | 80.924 mm |
| Dimensions · Recess diameter inner ring · (d_2) · ≈ | 79.959 mm |
| Dimensions · Shoulder diameter outer ring · (D_1) · ≈ | 84.176 mm |
| Dimensions · Recess diameter outer ring · (D_2) · ≈ | 85.242 mm |
| Dimensions · Ball diameter | 3.175 mm |
| Dimensions · Maximum radius of shaft or housing fillet | 0.635 mm |
| Calculation data · Basic dynamic load rating · (C) | 2.76 kN |
| Calculation data · Basic static load rating · (C_0) | 3.9 kN |
| Calculation data · Limiting speed | 2230 r/min |
Family specifications and selection conditions
| Product description | Radial contact ball bearings with seals or shields are designed to accommodate radial loads and some axial loads in either direction. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. The bearings are available with metric and inch boundary dimensions. |
|---|---|
| Manufacturer features | Accommodate radial and some axial loads in both directions • Integral sealing prolongs bearing service life • Thin cross section • Lightweight • Low friction • High stiffness • High running accuracy |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.