SKF · plain bearings
SKF GEP 160 FS
Radial spherical plain bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 160 mm |
|---|---|
| Outside diameter | 230 mm |
| Width, inner ring | 115 mm |
| Width, outer ring | 109 mm |
| Basic dynamic load rating | 1600 kN |
| Basic static load rating | 2400 kN |
| Sliding contact surface combination | Steel/PTFE FRP |
| Material, inner ring | Bearing steel |
| Maintenance | Maintenance-free |
| Sealing | Without |
| Relubrication feature | With |
| Product net weight | 16.6 kg |
| eClass code | 23-05-01-06 |
| UNSPSC code | 31171515 |
| Dimensions · Bore diameter · (d) | 160 mm |
| Dimensions · Outside diameter · (D) | 230 mm |
| Dimensions · Width · (B) | 115 mm |
| Dimensions · Width outer ring · (C) | 109 mm |
| Dimensions · Angle of tilt · (α) | 2 ° |
| Dimensions · Raceway diameter inner ring · (d_k) | 210 mm |
| Dimensions · Width annular lubrication groove at outer ring · (b) | 7.5 mm |
| Dimensions · Width annular lubrication groove at inner ring · (b_1) | 7.5 mm |
| Dimensions · Diameter lubrication hole (outer ring) · (M) | 4 mm |
| Dimensions · Chamfer dimension bore · (r_1) · min. | 1 mm |
| Dimensions · Chamfer dimension outer ring · (r_2) · min. | 1 mm |
| Abutment dimensions · Abutment diameter shaft · (d_a) · min. | 169 mm |
| Abutment dimensions · Abutment diameter shaft · (d_a) · max. | 175 mm |
| Abutment dimensions · Abutment diameter housing · (D_a) · min. | 195 mm |
| Abutment dimensions · Abutment diameter housing · (D_a) · max. | 218 mm |
| Abutment dimensions · Fillet radius shaft · (r_a) · max. | 1 mm |
| Abutment dimensions · Fillet radius housing · (r_b) · max. | 1 mm |
| Calculation data · Basic dynamic load rating · (C) | 1600 kN |
| Calculation data · Basic static load rating · (C_0) | 2400 kN |
| Calculation data · Specific dynamic load factor · (K) | 80 N/mm² |
| Calculation data · Specific static load factor · (K_0) | 120 N/mm² |
| Calculation data · Material constant · (K_M) | 1055 |
Family specifications and selection conditions
| Product description | These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination. They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle. |
|---|---|
| Manufacturer features | Designed for radial and combined radial and axial loads • Long service life and maintenance-free • Relatively insensitive to contaminants • Low coefficient of friction |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.