SKF · mounted bearings
SKF FYTF 35 FM
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 35 mm |
|---|---|
| Housing overall width | 22 mm |
| Width, total | 41.9 mm |
| Centre distance between bolt holes | 100 mm |
| Bearing width, total | 38.9 mm |
| Attachment bolt diameter | 10 mm |
| Basic dynamic load rating | 25.5 kN |
| Basic static load rating | 15.3 kN |
| Limiting speed | 5300 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Flanged |
| Flanged housing type | Oval |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Eccentric collar |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Without |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 0.968 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | ISO |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 35 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 46.1 mm |
| Dimensions · Outside diameter of locking ring · (d_2) | 51.1 mm |
| Dimensions · Width of housing · (A) | 22 mm |
| Dimensions · Overall bearing width · (B_1) | 38.9 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 6.75 mm |
| Dimensions · Overall height · (H) | 94 mm |
| Dimensions · Centre distance between bolt holes · (J) | 100 mm |
| Dimensions · Overall length · (L) | 126 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 10.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 29.4 mm |
| Dimensions · Overall width · (T) | 41.9 mm |
| Calculation data · Basic dynamic load rating · (C) | 25.5 kN |
| Calculation data · Basic static load rating · (C_0) | 15.3 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.655 kN |
| Calculation data · Limiting speed | 5300 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | M10x1 |
| Mounting information · Hexagonal key size for set screw | 5 mm |
| Mounting information · Recommended tightening torque for set screw | 16.5 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 10 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.375 in |
Family specifications and selection conditions
| Product description | These oval flanged ball bearing units feature a compact housing. They consist of an insert bearing, with a narrow inner ring and eccentric locking, and are intended primarily for use in applications where the direction of rotation is constant. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. |
|---|---|
| Manufacturer features | Quick and easy to mount onto the shaft • Accommodate static initial misalignment • Long service life • Reduced noise and vibration levels • Resist high levels of contamination • Accommodate relatively heavy loads • Cost-effective • Compact design |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.