SKF · mounted bearings
SKF FYTB 30 LF
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 30 mm |
|---|---|
| Housing overall width | 32.5 mm |
| Width, total | 43.2 mm |
| Centre distance between bolt holes | 116.5 mm |
| Bearing width, total | 37.2 mm |
| Attachment bolt diameter | 10 mm |
| Basic dynamic load rating | 19.5 kN |
| Basic static load rating | 11.2 kN |
| Limiting speed | 6300 r/min |
| Housing type | Flanged |
| Flanged housing type | Oval |
| Number of bolt holes for fasteners | 2 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | SKF ConCentra |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Metric |
| Product net weight | 0.843 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | ISO |
| Purpose specific | For material handling applications; For air handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 30 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 39.7 mm |
| Dimensions · Outside diameter of locking ring · (d_2) | 48 mm |
| Dimensions · Width of housing · (A) | 32.5 mm |
| Dimensions · Flange width · (A_1) | 13 mm |
| Dimensions · Depth of centring recess · (A_3) | 3.2 mm |
| Dimensions · Width including end cover · (A_5) | 22.5 mm |
| Dimensions · Width of inner ring · (B) | 28 mm |
| Dimensions · Overall bearing width · (B_1) | 37.2 mm |
| Dimensions · Top external diameter · (D_b1) | 77 mm |
| Dimensions · Base external diameter · (D_b2) | 83 mm |
| Dimensions · Diameter of housing centering recess · (D_c) | 76.2 mm |
| Dimensions · Overall height · (H) | 141.5 mm |
| Dimensions · Centre distance between bolt holes · (J) | 116.5 mm |
| Dimensions · Overall length · (L) | 83 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 11.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 23.2 mm |
| Dimensions · Overall width · (T) | 43.2 mm |
| Dimensions · Dimension | Values specified for B_1 and s_1 are approximate and before the set screw is tightened (sleeve and inner ring bore at starting position). |
| Dimensions · Threaded hole · Housing thread for grease fitting · (R_G) | 1/4-28 UNF |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 21 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 45 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.5 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 7 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 SAE-LT |
| Dimensions · Dowel pins · Distance of dowel pins · (J_6) | 98.5 mm |
| Dimensions · Dowel pins · Axial offset of dowel pins · (J_7) | 12.5 mm |
| Dimensions · Dowel pins · Recommended diameter for dowel pins · (N_4) | 2 mm |
| Calculation data · Basic dynamic load rating · (C) | 19.5 kN |
| Calculation data · Basic static load rating · (C_0) | 11.2 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.475 kN |
| Calculation data · Limiting speed | 6300 r/min |
| Mounting information · Set screw · (G_2) | M5 |
| Mounting information · Hexagonal key size for set screw | 2.54 mm |
| Mounting information · Recommended tightening torque for set screw | 4.2 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 10 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.375 in |
Family specifications and selection conditions
| Product description | These oval flanged ball bearing units are compliant with ISO standards. They consist of an insert bearing, with an extended inner ring and SKF ConCentra locking, and are particularly well suited for applications where there are relatively high speeds and moderate loads, and where vibration, low noise, and minimal maintenance are key operational parameters. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. |
|---|---|
| Manufacturer features | Resist high levels of contamination • Designed for high temperatures and speeds • Accommodate relatively heavy loads • Cost-effective |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.