SKF · mounted bearings
SKF FYK 35 TF
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 35 mm |
|---|---|
| Housing overall width | 35 mm |
| Centre distance between bolt holes | 92 mm |
| Bearing width, total | 42.9 mm |
| Attachment bolt diameter | 12 mm |
| Basic dynamic load rating | 25.5 kN |
| Basic static load rating | 15.3 kN |
| Limiting speed | 5300 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 0.676 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | ISO |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 35 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 46.1 mm |
| Dimensions · Width of housing · (A) | 35 mm |
| Dimensions · Flange width · (A_1) | 17 mm |
| Dimensions · Depth of centring recess · (A_3) | 3.2 mm |
| Dimensions · Standout of end cover · (A_5) | 24 mm |
| Dimensions · Width of inner ring · (B) | 42.9 mm |
| Dimensions · Overall bearing width · (B_1) | 42.9 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 6 mm |
| Dimensions · Top external diameter · (D_b) | 90 mm |
| Dimensions · Diameter of housing centering recess · (D_c) | 106.4 mm |
| Dimensions · Centre distance between bolt holes · (J) | 92 mm |
| Dimensions · Overall length · (L) | 118 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 14.8 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 25.4 mm |
| Dimensions · Overall width · (T) | 46.4 mm |
| Calculation data · Basic dynamic load rating · (C) | 25.5 kN |
| Calculation data · Basic static load rating · (C_0) | 15.3 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.655 kN |
| Calculation data · Limiting speed | 5300 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | M6x0.75 |
| Mounting information · Hexagonal key size for set screw | 3 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 12 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.5 in |
Family specifications and selection conditions
| Product description | These square flanged ball bearing units are compliant with ISO standards. The unit consists of an insert bearing, with an extended inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. |
|---|---|
| Manufacturer features | Chemical resistant • Pre-lubricated for life • Lightweight • Strong |
Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.