SKF · mounted bearings
SKF F4BRP 315-SRB-CRH
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 100.013 mm |
|---|---|
| Hub diameter | 206.375 mm |
| Housing overall width | 92.075 mm |
| Width, total | 90.488 mm |
| Attachment bolt diameter | 19.05 mm |
| Pitch diameter of bolt holes of round and triangle flange type housing | 238.125 mm |
| Bearing width, total | 88.503 mm |
| Basic dynamic load rating | 433 kN |
| Basic static load rating | 490 kN |
| Limiting speed | 2000 r/min |
| Unit system | Inch |
| Housing type | Flanged |
| Flanged housing type | Round, piloted |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | SKF ConCentra |
| Bearing position | Locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 18.1 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | SKF ConCentra |
| Dimensions · Shaft diameter · (d_a) | 100.013 mm |
| Dimensions · Collar outside diameter · (d_2) | 129.997 mm |
| Dimensions · Hub diameter · (D_a) | 206.375 mm |
| Dimensions · Housing height · (A) | 92.075 mm |
| Dimensions · Housing flange height · (A_1) | 22.225 mm |
| Dimensions · Centre line of free bearing · (A_2) | 20.638 mm |
| Dimensions · Hub height · (A_3) | 50.8 mm |
| Dimensions · Housing flange to machined flange face · (A_4) | 25.4 mm |
| Dimensions · Width including end cover · (A_5) | 138.906 mm |
| Dimensions · Flange face to inner ring face · (A_6) | 63.897 mm |
| Dimensions · Inner ring width · (B) | 88.503 mm |
| Dimensions · Bolt pitch diameter · (J) | 238.125 mm |
| Dimensions · Housing outside diameter · (L) | 276.225 mm |
| Dimensions · Bolt hole diameter · (N) | 20.638 mm |
| Dimensions · Centre line unit to side face of inner ring · (s) | 44.053 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Overall unit width · (T) | 90.488 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 UNF |
| Calculation data · Basic dynamic load rating · (C) | 433 kN |
| Calculation data · Basic static load rating · (C_0) | 490 kN |
| Calculation data · Fatigue load limit · (P_u) | 49 kN |
| Calculation data · Limiting speed | 2000 r/min |
| Calculation data · Limiting value · (e) | 0.24 |
| Calculation data · Calculation factor · (Y_1) | 2.8 |
| Calculation data · Calculation factor · (Y_2) | 4.2 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 139.954 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 34.9 kN |
| Mounting information · Attachment bolt diameter · (G) | 19.05 mm |
| Mounting information · Set screws | M6-1 x 16mm |
| Mounting information · Number of set screws | 7 |
| Mounting information · Tightening torque for set screws | 7.9 N·m |
| Mounting information · Grease quantity for relubrication | 13 g |
| Mounting information · Tapped hole for push-out bolt · (G_2) | 3/4-10 UNC |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Flanged units can support rotating shafts through walls, bulkheads or other flat surfaces. Their machined extension on one side fits into precise bulk head openings. The SKF ConCentra locking combines easy mounting and a concentric tight fit on the shaft for high speeds and low vibration. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick mounting on the support surface, quick locking on the shaft • True concentric fit on the shaft for high speeds and low vibration • Precise fit into bulk head openings |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.