SKF · mounted bearings
SKF F4BRP 203-SRB-SLE
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 55.563 mm |
|---|---|
| Hub diameter | 127 mm |
| Housing overall width | 65.088 mm |
| Width, total | 83.344 mm |
| Attachment bolt diameter | 12.7 mm |
| Pitch diameter of bolt holes of round and triangle flange type housing | 152.4 mm |
| Bearing width, total | 79.375 mm |
| Basic dynamic load rating | 109 kN |
| Basic static load rating | 127 kN |
| Limiting speed | 8500 r/min |
| Unit system | Inch |
| Housing type | Flanged |
| Flanged housing type | Round, piloted |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Set screws |
| Bearing position | Non-locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Labyrinth seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 4.5 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | Set screws |
| Dimensions · Shaft diameter · (d_a) | 55.563 mm |
| Dimensions · Collar outside diameter · (d_2) | 81.575 mm |
| Dimensions · Hub diameter · (D_a) | 127 mm |
| Dimensions · Housing height · (A) | 65.088 mm |
| Dimensions · Housing flange height · (A_1) | 14.288 mm |
| Dimensions · Centre line of free bearing · (A_2) | 14.288 mm |
| Dimensions · Hub height · (A_3) | 25.4 mm |
| Dimensions · Housing flange to machined flange face · (A_4) | 18.256 mm |
| Dimensions · Width including end cover · (A_5) | 101.203 mm |
| Dimensions · Flange face to inner ring face · (A_6) | 42.069 mm |
| Dimensions · Inner ring width · (B) | 79.375 mm |
| Dimensions · Bolt pitch diameter · (J) | 152.4 mm |
| Dimensions · Housing outside diameter · (L) | 180.975 mm |
| Dimensions · Bolt hole diameter · (N) | 14.288 mm |
| Dimensions · Centre line unit to side face of inner ring · (s) | 28.575 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Overall unit width · (T) | 83.344 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 UNF |
| Calculation data · Basic dynamic load rating · (C) | 109 kN |
| Calculation data · Basic static load rating · (C_0) | 127 kN |
| Calculation data · Fatigue load limit · (P_u) | 14 kN |
| Calculation data · Limiting speed | 8500 r/min |
| Calculation data · Limiting value · (e) | 0.24 |
| Calculation data · Calculation factor · (Y_1) | 2.8 |
| Calculation data · Calculation factor · (Y_2) | 4.2 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 77.47 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 2.29 kN |
| Mounting information · Attachment bolt diameter · (G) | 12.7 mm |
| Mounting information · Set screws | 3/8"-24 UNF-3A x 1/2" |
| Mounting information · Number of set screws | 2 |
| Mounting information · Tightening torque for set screws | 28.2 N·m |
| Mounting information · Grease quantity for relubrication | 5 g |
| Mounting information · Tapped hole for push-out bolt · (G_2) | 1/2-13 UNC |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Flanged units can support rotating shafts through walls, bulkheads or other flat surfaces. Their machined extension on one side fits into precise bulk head openings. Locking on the shaft by set screws is easy and reliable. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick mounting on the support surface, quick locking on the shaft • Precise fit into bulk head openings |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.