SKF · mounted bearings
SKF F4BE 407-SRB-CLE
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 112.713 mm |
|---|---|
| Housing overall width | 131.763 mm |
| Width, total | 131.763 mm |
| Centre distance between bolt holes | 222.25 mm |
| Attachment bolt diameter | 22.225 mm |
| Bearing width, total | 98.425 mm |
| Basic dynamic load rating | 572 kN |
| Basic static load rating | 640 kN |
| Limiting speed | 4000 r/min |
| Unit system | Inch |
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | SKF ConCentra |
| Bearing position | Non-locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Labyrinth seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 28.6 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | SKF ConCentra |
| Dimensions · Shaft diameter · (d_a) | 112.713 mm |
| Dimensions · Collar outer diameter · (d_2) | 150.012 mm |
| Dimensions · Housing width · (A) | 131.763 mm |
| Dimensions · Flange thickness · (A_1) | 60.325 mm |
| Dimensions · Machined face to centre line bearing · (A_2) | 84.138 mm |
| Dimensions · Total width incl. end cover · (A_5) | 184.944 mm |
| Dimensions · Inner ring width · (B) | 98.425 mm |
| Dimensions · Bolt distance or pitch diameter · (J) | 222.25 mm |
| Dimensions · Housing length · (L) | 276.225 mm |
| Dimensions · Bolt hole diameter · (N) | 23.813 mm |
| Dimensions · Inner ring centre to end · (s) | 49.609 mm |
| Dimensions · Axial displacement · (S) | 0.794 mm |
| Dimensions · Total width · (T) | 131.763 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 572 kN |
| Calculation data · Basic static load rating · (C_0) | 640 kN |
| Calculation data · Fatigue load limit · (P_u) | 63 kN |
| Calculation data · Limiting speed | 4000 r/min |
| Calculation data · Limiting value · (e) | 0.25 |
| Calculation data · Calculation factor · (Y_1) | 2.7 |
| Calculation data · Calculation factor · (Y_2) | 4 |
| Calculation data · Calculation factor · (Y_0) | 2.5 |
| Calculation data · Bearing mean diameter · (d_m) | 154.94 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 44.9 kN |
| Mounting information · Attachment bolt diameter · (G) | 0.875 in |
| Mounting information · Set screws | M8-1.25 x 20mm |
| Mounting information · Number of set screws | 5 |
| Mounting information · Tightening torque for set screws | 18.1 N·m |
| Mounting information · Grease quantity for relubrication | 21 g |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Flanged units can support rotating shafts through walls, bulkheads or other flat surfaces. The SKF ConCentra locking combines easy mounting and a concentric tight fit on the shaft for high speeds and low vibration. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick mounting on the support surface, quick locking on the shaft • True concentric fit on the shaft for high speeds and low vibration |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.