SKF · mounted bearings
SKF F4BC 40M-CPSS-DFHD
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 40 mm |
|---|---|
| Housing overall width | 38 mm |
| Centre distance between bolt holes | 102 mm |
| Bearing width, total | 40.7 mm |
| Attachment bolt diameter | 12 mm |
| Basic dynamic load rating | 24.7 kN |
| Basic static load rating | 19 kN |
| Limiting speed | 500 r/min |
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Stainless steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides and flinger on one side |
| Sealing type | Contact, gutter |
| Sealing, unit | End cover and back seal |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 0.92 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | Not standardized |
| Purpose specific | For food and beverage applications |
| Sealing type, bearing | Contact, gutter |
| Dimensions · Bore diameter · (d) | 40 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 51.8 mm |
| Dimensions · Width of housing · (A) | 38 mm |
| Dimensions · Flange width · (A_1) | 17 mm |
| Dimensions · Standout of end cover · (A_5) | 62.9 mm |
| Dimensions · Width of inner ring · (B) | 40.7 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 10 mm |
| Dimensions · Top external diameter · (D_b) | 93 mm |
| Dimensions · Diameter of housing centering recess · (D_c) | 88 mm |
| Dimensions · Depth of housing centering recess · (H_a) | 6 mm |
| Dimensions · Centre distance between bolt holes · (J) | 102 mm |
| Dimensions · Overall length · (L) | 135 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 14.2 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 30.2 mm |
| Dimensions · Overall width · (T) | 50.9 mm |
| Calculation data · Basic dynamic load rating · (C) | 24.7 kN |
| Calculation data · Basic static load rating · (C_0) | 19 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.8 kN |
| Calculation data · Limiting speed | 500 r/min |
| Mounting information · Set screw · (G_2) | M8x1 |
| Mounting information · Hexagonal key size for set screw | 4 mm |
| Mounting information · Recommended tightening torque for set screw | 6.5 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 12 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.5 in |
Family specifications and selection conditions
| Product description | These square flanged ball bearing units are designed especially for the food and beverage industries. They are chemical resistant, lightweight and strong. The unit consists of an insert bearing, with a narrow inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. |
|---|---|
| Manufacturer features | Chemical resistant • Lubricated for life with a non-toxic food grade grease • Lightweight • Strong |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.