SKF · mounted bearings
SKF F4BBD 208-SRB-SRH
Roller bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 63.5 mm |
|---|---|
| Housing overall width | 67.469 mm |
| Width, total | 90.488 mm |
| Attachment bolt diameter | 15.875 mm |
| Bearing width, total | 85.725 mm |
| Basic dynamic load rating | 168 kN |
| Basic static load rating | 216 kN |
| Limiting speed | 2500 r/min |
| Unit system | Inch |
| Housing type | Flanged |
| Flanged housing type | Bracket flange |
| Number of bolt holes for fasteners | 4 |
| Bearing insert | Spherical roller bearing |
| Retaining feature, inner ring | Set screws |
| Bearing position | Locating |
| Bore type | Cylindrical |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Bearing housing seal type | Radial lip seal |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Product net weight | 7.12 kg |
| eClass code | 23-05-16-90 |
| UNSPSC code | 31171537 |
| Metric/inch series | Inch |
| Locking method | Set screws |
| Dimensions · Shaft diameter · (d_a) | 63.5 mm |
| Dimensions · Collar outside diameter · (d_2) | 103.072 mm |
| Dimensions · Housing width · (A) | 67.469 mm |
| Dimensions · Flange width · (A_1) | 19.05 mm |
| Dimensions · Width including end cover · (A_5) | 105.569 mm |
| Dimensions · Inner ring width · (B) | 85.725 mm |
| Dimensions · Overall height · (H) | 230.981 mm |
| Dimensions · Distance from bearing centre line to bolt holes · (H_1) | 95.25 mm |
| Dimensions · Distance from bearing centre line to bottom of flange · (H_2) | 158.75 mm |
| Dimensions · Bolt distance, horizontal · (J) | 76.2 mm |
| Dimensions · Bolt distance, vertical · (J_1) | 44.45 mm |
| Dimensions · Overall length · (L) | 144.463 mm |
| Dimensions · Flange length · (L_1) | 123.825 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 17.463 mm |
| Dimensions · Distance from locking device side face to bearing centre · (s_1) | 53.975 mm |
| Dimensions · Total width · (T) | 90.488 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 168 kN |
| Calculation data · Basic static load rating · (C_0) | 216 kN |
| Calculation data · Fatigue load limit · (P_u) | 23.6 kN |
| Calculation data · Limiting speed | 2500 r/min |
| Calculation data · Limiting value · (e) | 0.24 |
| Calculation data · Calculation factor · (Y_1) | 2.8 |
| Calculation data · Calculation factor · (Y_2) | 4.2 |
| Calculation data · Calculation factor · (Y_0) | 2.8 |
| Calculation data · Bearing mean diameter · (d_m) | 92.456 mm |
| Calculation data · Axial holding force of the locking mechanism · (P_a) | 4 kN |
| Mounting information · Attachment bolt diameter · (G) | 15.875 mm |
| Mounting information · Set screw | 1/2"-20 UNF-3A x 3/4" |
| Mounting information · Number of set screws | 2 |
| Mounting information · Recommended tightening torque for set screws | 70.1 N·m |
| Mounting information · Grease quantity for relubrication | 7 g |
Family specifications and selection conditions
| Product description | Roller bearing units are robust, ready-to-mount units that are lubricated and sealed at the factory for maximum service life. Flanged units can support rotating shafts through walls, bulkheads or other flat surfaces. Locking on the shaft by set screws is easy and reliable. Optional end covers provide additional protection at shaft ends. |
|---|---|
| Manufacturer features | Factory lubricated and sealed, ready to mount • Long service life with minimal or no maintenance • Quick mounting on the support surface, quick locking on the shaft |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.