SKF · mounted bearings
SKF F4B 108-RM
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 38.1 mm |
|---|---|
| Housing overall width | 38.9 mm |
| Width, total | 50.7 mm |
| Centre distance between bolt holes | 101.6 mm |
| Bearing width, total | 36 mm |
| Attachment bolt diameter | 12.7 mm |
| Basic dynamic load rating | 30.7 kN |
| Basic static load rating | 19 kN |
| Limiting speed | 4800 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Flanged |
| Flanged housing type | Square |
| Number of bolt holes for fasteners | 4 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Inch |
| Product net weight | 1.81 kg |
| eClass code | 23-05-16-01 |
| UNSPSC code | 31171536 |
| Compliance with standard | North American standard |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 38.1 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 51.8 mm |
| Dimensions · Width of housing · (A) | 38.9 mm |
| Dimensions · Flange width · (A_1) | 16.7 mm |
| Dimensions · Standout of end cover · (A_5) | 26 mm |
| Dimensions · Width of inner ring · (B) | 36 mm |
| Dimensions · Overall bearing width · (B_1) | 36 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 7 mm |
| Dimensions · Top external diameter · (D_b1) | 104.8 mm |
| Dimensions · Centre distance between bolt holes · (J) | 101.6 mm |
| Dimensions · Overall length · (L) | 130.2 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 14.3 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 25.3 mm |
| Dimensions · Overall width · (T) | 50.7 mm |
| Dimensions · Threaded hole · Housing thread for grease fitting · (R_G) | 1/8-27 NPT |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 28.1 mm |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.579 mm |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 11.113 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/8-27 NPT |
| Calculation data · Basic dynamic load rating · (C) | 30.7 kN |
| Calculation data · Basic static load rating · (C_0) | 19 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.8 kN |
| Calculation data · Limiting speed | 4800 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | 5/16-24 UNF |
| Mounting information · Hexagonal key size for set screw | 3.969 mm |
| Mounting information · Recommended tightening torque for set screw | 6.5 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 12 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.5 in |
Family specifications and selection conditions
| Product description | These square flanged ball bearing units consists of an insert bearing mounted in a cast iron housing that can be bolted to a machine wall or frame. The units have set screw locking which makes them suitable for applications where the direction of rotation is constant or alternating, and they can be relubricated through a grease fitting in the housing. These units are especially suitable for bearing arrangements that operate under tough conditions with relatively heavy loads. |
|---|---|
| Manufacturer features | Accommodate high levels of contamination • Designed for high speeds and temperatures • Ready to mount • Lubricated and sealed bearings • Quick locking onto the shaft |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.