SKF · mounted bearings
SKF F3BBC 50M-CPSS-DFHD
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 50 mm |
|---|---|
| Housing overall width | 42 mm |
| Bearing width, total | 43.6 mm |
| Attachment bolt diameter | 16 mm |
| Basic dynamic load rating | 29.6 kN |
| Basic static load rating | 23.2 kN |
| Limiting speed | 500 r/min |
| Housing type | Flanged |
| Flanged housing type | 3-bolt bracket |
| Number of bolt holes for fasteners | 3 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Composite for the SKF Food Line |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal on both sides and flinger on one side |
| Sealing type | Contact, gutter |
| Sealing, unit | End cover and back seal |
| Lubricant | Grease |
| Relubrication hole | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Product net weight | 1.05 kg |
| eClass code | 23-05-08-02 |
| UNSPSC code | 31171536 |
| Compliance with standard | Not standardized |
| Purpose specific | For food and beverage applications |
| Sealing type, bearing | Contact, gutter |
| Dimensions · Bore diameter · (d) | 50 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 62.51 mm |
| Dimensions · Centring diameter · (D_c) | 98 mm |
| Dimensions · Groove height for backseal · (H_a) | 6 mm |
| Dimensions · Width of housing · (A) | 42 mm |
| Dimensions · Flange width · (A_1) | 19 mm |
| Dimensions · Standout of end cover · (A_5) | 69.1 mm |
| Dimensions · Width of inner ring · (B) | 43.6 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 9 mm |
| Dimensions · Distance between attachment bolt holes · (J) | 60 mm |
| Dimensions · Distance between attachment bolt holes · (J_1) | 46 mm |
| Dimensions · Overall height · (H) | 189 mm |
| Dimensions · Radial position of the spherical seat · (H_1) | 68 mm |
| Dimensions · Overall length · (L) | 108 mm |
| Dimensions · Flange length · (L_1) | 104 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 17.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 32.6 mm |
| Dimensions · Overall width · (T) | 54.1 mm |
| Calculation data · Basic dynamic load rating · (C) | 29.6 kN |
| Calculation data · Basic static load rating · (C_0) | 23.2 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.98 kN |
| Calculation data · Limiting speed | 500 r/min |
| Mounting information · Set screw · (G_2) | M10x1 |
| Mounting information · Hexagonal key size for set screw | 5 mm |
| Mounting information · Recommended tightening torque for set screw | 16.5 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 16 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.625 in |
Family specifications and selection conditions
| Product description | These three-bolt flanged ball bearing units are designed especially for the food and beverage industries. They are chemical resistant, lightweight and strong. The unit consists of an insert bearing, with a narrow inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. |
|---|---|
| Manufacturer features | Chemical resistant • Lubricated for life with a non-toxic food grade grease • Lightweight • Strong |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.