SKF · mounted bearings
SKF F3BB 100-TF
Ball bearing units — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Shaft diameter | 25.4 mm |
|---|---|
| Housing overall width | 28.5 mm |
| Width, total | 36.5 mm |
| Bearing width, total | 34.1 mm |
| Attachment bolt diameter | 9.525 mm |
| Basic dynamic load rating | 14 kN |
| Basic static load rating | 7.8 kN |
| Limiting speed | 7000 r/min |
| Note | Limiting speed with shaft tolerance h6 |
| Housing type | Flanged |
| Flanged housing type | 3-bolt bracket |
| Number of bolt holes for fasteners | 3 |
| Fastening bolt hole type | Plain |
| Retaining feature, inner ring | Set screws |
| Bore type | Cylindrical |
| Rubber seating ring | Without |
| Material, housing | Spheroidal cast iron |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Sealing type | Contact, standard |
| Sealing, unit | Optional end cover |
| Lubricant | Grease |
| Relubrication hole | With |
| Grease fitting | With |
| Unit system | Inch |
| Product net weight | 0.662 kg |
| eClass code | 23-05-16-01 |
| UNSPSC code | 31171536 |
| Compliance with standard | North American standard |
| Purpose specific | For material handling applications |
| Sealing type, bearing | Contact, standard |
| Dimensions · Bore diameter · (d) | 25.4 mm |
| Dimensions · Outer diameter of inner ring · (d_1) · ≈ | 33.74 mm |
| Dimensions · Width of housing · (A) | 28.5 mm |
| Dimensions · Flange width · (A_1) | 9.5 mm |
| Dimensions · Standout of end cover · (A_5) | 20.5 mm |
| Dimensions · Width of inner ring · (B) | 34.1 mm |
| Dimensions · Distance from locking device side face to thread centre · (B_4) | 5 mm |
| Dimensions · Distance between attachment bolt holes · (J) | 41.4 mm |
| Dimensions · Distance between attachment bolt holes · (J_1) | 28.6 mm |
| Dimensions · Overall height · (H) | 121 mm |
| Dimensions · Radial position of the spherical seat · (H_1) | 46 mm |
| Dimensions · Overall length · (L) | 70 mm |
| Dimensions · Flange length · (L_1) | 70 mm |
| Dimensions · Diameter of attachment bolt hole · (N) | 10.5 mm |
| Dimensions · Distance from locking device side face to raceway centre · (s_1) | 19.8 mm |
| Dimensions · Overall width · (T) | 36.5 mm |
| Dimensions · Threaded hole · Housing thread for grease fitting · (R_G) | 1/4-28 UNF |
| Dimensions · Threaded hole · Axial position of the housing thread · (R_1) | 18.5 mm |
| Dimensions · Threaded hole · Angular position of the housing thread · (R_α) | 45 ° |
| Dimensions · Grease fitting · Diameter of head sphere of grease fitting · (D_N) | 6.579 mm |
| Dimensions · Grease fitting · Thread of grease fitting · (G_N) | 1/4-28 SAE-LT |
| Dimensions · Grease fitting · Hexagonal key size for the grease fitting · (SW_N) | 7.938 mm |
| Calculation data · Basic dynamic load rating · (C) | 14 kN |
| Calculation data · Basic static load rating · (C_0) | 7.8 kN |
| Calculation data · Fatigue load limit · (P_u) | 0.335 kN |
| Calculation data · Limiting speed | 7000 r/min |
| Calculation data · Dimension | Limiting speed with shaft tolerance h6 |
| Mounting information · Set screw · (G_2) | 1/4-28 UNF |
| Mounting information · Hexagonal key size for set screw | 3.175 mm |
| Mounting information · Recommended tightening torque for set screw | 4 N·m |
| Mounting information · Recommended diameter for attachment bolts, mm · (G) | 10 mm |
| Mounting information · Recommended diameter for attachment bolts, inch · (G) | 0.375 in |
Family specifications and selection conditions
| Product description | Flanged ball bearing units consisting of an insert bearing mounted in a composite or cast metal housing that can be bolted to a machine wall or frame. In addition to being part of a unit, some flanged housings for insert bearings are available as separate components. The SKF assortment includes ball bearing units compliant with several industrial standards, meeting many requirements regarding bolt patterns and mechanisms for locking onto the shaft. |
|---|---|
| Manufacturer features | Ready to mount • Lubricated and sealed bearings • Quick locking on the shaft • Large variety of housing shapes, housing materials, and locking methods • Concentric locking options for high speeds and low vibration |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.