SKF · industrial seals
SKF DX-1750-J1S
Wiper seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Rod diameter | 44.45 mm |
|---|---|
| Housing groove bore diameter | 53.9 mm |
| Housing groove width | 4.75 mm |
| Bore type | Snap-in wiper seal |
| Design | DX |
| Sealing lip material | Polyurethane (TPU U-1003) |
| O-ring material | Nitrile Rubber (NBR A-8501) |
| Product net weight | 0.0034 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Rod diameter · (d) | 44.45 mm |
| Dimensions · Housing groove diameter · (D) | 53.9 mm |
| Dimensions · Housing shoulder diameter · (D_2) | 50.67 mm |
| Dimensions · Housing groove width · (L) | 4.75 mm |
| Dimensions · Radial depth · (S) | 4.72 mm |
| Dimensions · Groove radius · (R) · max. | 0.64 mm |
| Dimensions · Lead-in chamfer length on rod · (C) · min. | 4.75 mm |
| Dimensions · Tolerances · Dimension · (tol d) | Tolerance for rod diameter is determined by the rod seal. |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.15 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D_2) | 0.127 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.102 mm |
| Materials · Primary sealing element | Polyurethane (TPU U-1003) |
| Materials · Additional element | Nitrile Rubber (NBR A-8501) |
| Operating conditions · Speed · max. | 1 m/s |
| Operating conditions · Temperature · min. | -40 °C |
| Operating conditions · Temperature · max. | 120 °C |
| Operating conditions · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously. |
Family specifications and selection conditions
| Product description | Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DX seals are polyurethane snap-in wiper seals. They have a patented profile with a single-lip design and a notched, vented inside edge. These profiles incorporate a nitrile rubber O-ring that maintains a robust static sealing contact in the housing and serves as an energizer to provide consistent long-term preload on the dynamic lip. |
|---|---|
| Manufacturer features | Easy to install without any special equipment • Include notches and an energizer for proper operation • Suitable for heavy duty applications • Available in inch sizes • If not in stock, alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.