BEARING WORLD

SKF · industrial seals

SKF DTW-3250-J2G

Wiper seals — manufacturer technical reference and quotation support in Saudi Arabia.

Product directory / SKF

Request a quote for this productTalk to Bearing World

لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.

Manufacturer-listed technical specifications
Rod diameter82.55 mm
Housing groove bore diameter95.17 mm
Housing groove width6.32 mm
Bore typeSnap-in wiper seal
DesignDTW
Sealing lip materialPolyurethane (TPU U-1003)
Product net weight0.0145 kg
eClass code23-07-01-90
UNSPSC code31181602
Dimensions · Rod diameter · (d)82.55 mm
Dimensions · Housing groove diameter · (D)95.17 mm
Dimensions · Housing shoulder diameter · (D_2)90.86 mm
Dimensions · Housing groove width · (L)6.32 mm
Dimensions · Radial depth · (S)6.31 mm
Dimensions · Groove radius · (R) · max.0.64 mm
Dimensions · Lead-in chamfer length on rod · (C) · min.6.35 mm
Dimensions · Tolerances · Dimension · (tol d)Tolerance for rod diameter is determined by the rod seal.
Dimensions · Tolerances · Upper limit deviation · (tol D)0.15 mm
Dimensions · Tolerances · Lower limit deviation0 mm
Dimensions · Tolerances · Upper limit deviation · (tol D_2)0.127 mm
Dimensions · Tolerances · Upper limit deviation · (tol L)0.102 mm
Materials · Primary sealing elementPolyurethane (TPU U-1003)
Operating conditions · Speed · max.0.75 m/s
Operating conditions · Temperature · min.-40 °C
Operating conditions · Temperature · max.120 °C
Operating conditions · DimensionMaximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously.

Family specifications and selection conditions

Manufacturer-listed technical specifications
Product descriptionHydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure.
Manufacturer featuresEasy to install without any special equipment • Include notches and static lips for proper operation • Available in metric and inch sizes • If not in stock, alternatives can be produced by SKF SEAL JET systems

Manufacturer references

Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.

Explore SKF at Bearing World