SKF · industrial seals
SKF DTW-1250-J2G
Wiper seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Rod diameter | 31.75 mm |
|---|---|
| Housing groove bore diameter | 41.2 mm |
| Housing groove width | 4.75 mm |
| Bore type | Snap-in wiper seal |
| Design | DTW |
| Sealing lip material | Polyurethane (TPU U-1003) |
| Product net weight | 0.0035 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Rod diameter · (d) | 31.75 mm |
| Dimensions · Housing groove diameter · (D) | 41.2 mm |
| Dimensions · Housing shoulder diameter · (D_2) | 37.97 mm |
| Dimensions · Housing groove width · (L) | 4.75 mm |
| Dimensions · Radial depth · (S) | 4.72 mm |
| Dimensions · Groove radius · (R) · max. | 0.64 mm |
| Dimensions · Lead-in chamfer length on rod · (C) · min. | 4.75 mm |
| Dimensions · Tolerances · Dimension · (tol d) | Tolerance for rod diameter is determined by the rod seal. |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.15 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D_2) | 0.127 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.102 mm |
| Materials · Primary sealing element | Polyurethane (TPU U-1003) |
| Operating conditions · Speed · max. | 0.75 m/s |
| Operating conditions · Temperature · min. | -40 °C |
| Operating conditions · Temperature · max. | 120 °C |
| Operating conditions · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature) should not be applied continuously nor simultaneously. |
Family specifications and selection conditions
| Product description | Hydraulic wiper seals prevent contaminants from entering a cylinder assembly and hydraulic system. DTW seals are polyurethane snap-in wiper seals. They have a single-lip design, with two additional radial and axial static seal lips that maintain the sealing contact and keep the wiper tight in the housing. Notches on the inside edge prevent the seals from trapping in pressure or being pushed out by pressure. |
|---|---|
| Manufacturer features | Easy to install without any special equipment • Include notches and static lips for proper operation • Available in metric and inch sizes • If not in stock, alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.