SKF · industrial seals
SKF DPV-334-K0M
Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Cylinder bore diameter | 76.2 mm |
|---|---|
| Piston groove diameter | 66.8 mm |
| Piston groove width | 7.14 mm |
| Pressure limit, maximum | 40 N/mm² |
| Design | DPV |
| Primary sealing element | Polyurethane (X-ECOPUR PS) |
| Compound 2 | Nitrile Rubber (NBR A-8501) |
| Unit system | Inch |
| Product net weight | 0.008 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Cylinder bore diameter · (D) | 76.2 mm |
| Dimensions · Piston groove diameter · (d) | 66.8 mm |
| Dimensions · Piston groove width · (L) | 7.14 mm |
| Dimensions · Radial depth · (S) | 4.7 mm |
| Dimensions · Groove radius · (R) · max. | 0.64 mm |
| Dimensions · Lead-in chamfer length · (C) · min. | 3.96 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.05 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances · Lower limit deviation | -0.05 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.127 mm |
| Maximum extrusion gap · Reference temperature for extrusion gap | 80 °C |
| Maximum extrusion gap · Extrusion gap at 160 bar · (e) | 0.46 mm |
| Maximum extrusion gap · Extrusion gap at 250 bar · (e) | 0.3 mm |
| Maximum extrusion gap · Extrusion gap at 400 bar · (e) | 0.2 mm |
| Pressure and speed · Pressure · max. | 400 bar |
| Pressure and speed · Speed · max. | 1 m/s |
| Operating temperature · Extreme upper temperature limit · (T_6) · max. | 130 °C |
| Operating temperature · Reduced performance upper temperature limit · (T_5) · max. | 120 °C |
| Operating temperature · Upper operating temperature limit · (T_4) · max. | 110 °C |
| Operating temperature · Lower operating temperature limit · (T_3) · min. | -20 °C |
| Operating temperature · Reduced performance lower temperature limit · (T_2) · min. | -30 °C |
| Operating temperature · Extreme lower temperature limit · (T_1) · min. | -40 °C |
| Operating temperature · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. |
| Materials · Primary sealing element | Polyurethane (X-ECOPUR PS) |
| Materials · Additional element | Nitrile Rubber (NBR A-8501) |
Family specifications and selection conditions
| Product description | DPV seals are inch sized, double-acting piston seals with a polyurethane slide ring and a rectangular nitrile rubber energizer. The wear-resistant slide ring has a profiled sealing surface, optimized to reduce friction and resist gap extrusion. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction. These profiles can usually be installed without special equipment. |
|---|---|
| Manufacturer features | Premium grade sealing solution • Suitable for medium to heavy duty applications • Available in inch sizes • Fit O-ring dash-number seal housings • If not in stock alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.