BEARING WORLD

SKF · industrial seals

SKF DPV-326-K0M

Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.

Product directory / SKF

Request a quote for this productTalk to Bearing World

لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.

Manufacturer-listed technical specifications
Cylinder bore diameter50.8 mm
Piston groove diameter41.4 mm
Piston groove width7.14 mm
Pressure limit, maximum40 N/mm²
DesignDPV
Primary sealing elementPolyurethane (X-ECOPUR PS)
Compound 2Nitrile Rubber (NBR A-8501)
Unit systemInch
Product net weight0.005 kg
eClass code23-07-01-90
UNSPSC code31181602
Dimensions · Cylinder bore diameter · (D)50.8 mm
Dimensions · Piston groove diameter · (d)41.4 mm
Dimensions · Piston groove width · (L)7.14 mm
Dimensions · Radial depth · (S)4.7 mm
Dimensions · Groove radius · (R) · max.0.64 mm
Dimensions · Lead-in chamfer length · (C) · min.3.96 mm
Dimensions · Tolerances · Upper limit deviation · (tol D)0.05 mm
Dimensions · Tolerances · Lower limit deviation0 mm
Dimensions · Tolerances · Upper limit deviation · (tol d)0 mm
Dimensions · Tolerances · Lower limit deviation-0.05 mm
Dimensions · Tolerances · Upper limit deviation · (tol L)0.127 mm
Maximum extrusion gap · Reference temperature for extrusion gap80 °C
Maximum extrusion gap · Extrusion gap at 160 bar · (e)0.46 mm
Maximum extrusion gap · Extrusion gap at 250 bar · (e)0.3 mm
Maximum extrusion gap · Extrusion gap at 400 bar · (e)0.2 mm
Pressure and speed · Pressure · max.400 bar
Pressure and speed · Speed · max.1 m/s
Operating temperature · Extreme upper temperature limit · (T_6) · max.130 °C
Operating temperature · Reduced performance upper temperature limit · (T_5) · max.120 °C
Operating temperature · Upper operating temperature limit · (T_4) · max.110 °C
Operating temperature · Lower operating temperature limit · (T_3) · min.-20 °C
Operating temperature · Reduced performance lower temperature limit · (T_2) · min.-30 °C
Operating temperature · Extreme lower temperature limit · (T_1) · min.-40 °C
Operating temperature · DimensionMaximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
Materials · Primary sealing elementPolyurethane (X-ECOPUR PS)
Materials · Additional elementNitrile Rubber (NBR A-8501)

Family specifications and selection conditions

Manufacturer-listed technical specifications
Product descriptionDPV seals are inch sized, double-acting piston seals with a polyurethane slide ring and a rectangular nitrile rubber energizer. The wear-resistant slide ring has a profiled sealing surface, optimized to reduce friction and resist gap extrusion. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction. These profiles can usually be installed without special equipment.
Manufacturer featuresPremium grade sealing solution • Suitable for medium to heavy duty applications • Available in inch sizes • Fit O-ring dash-number seal housings • If not in stock alternatives can be produced by SKF SEAL JET systems

Manufacturer references

Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.

Explore SKF at Bearing World