SKF · industrial seals
SKF CPV-330-J1S
Piston seals — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Cylinder bore diameter | 63.5 mm |
|---|---|
| Piston groove diameter | 54.1 mm |
| Piston groove width | 7.14 mm |
| Pressure limit, maximum | 34 N/mm² |
| Design | CPV |
| Primary sealing element | Polyurethane (TPU U-1003) |
| Compound 2 | Nitrile Rubber (NBR A-8501) |
| Unit system | Inch |
| Product net weight | 0.01 kg |
| eClass code | 23-07-01-90 |
| UNSPSC code | 31181602 |
| Dimensions · Cylinder bore diameter · (D) | 63.5 mm |
| Dimensions · Piston groove diameter · (d) | 54.1 mm |
| Dimensions · Piston groove width · (L) | 7.14 mm |
| Dimensions · Radial depth · (S) | 4.7 mm |
| Dimensions · Groove radius · (R) · max. | 0.64 mm |
| Dimensions · Lead-in chamfer length · (C) · min. | 3.96 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol D) | 0.05 mm |
| Dimensions · Tolerances · Lower limit deviation | 0 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol d) | 0 mm |
| Dimensions · Tolerances · Lower limit deviation | -0.05 mm |
| Dimensions · Tolerances · Upper limit deviation · (tol L) | 0.127 mm |
| Maximum extrusion gap · Reference temperature for extrusion gap | 80 °C |
| Maximum extrusion gap · Extrusion gap at 160 bar · (e) | 0.3 mm |
| Maximum extrusion gap · Extrusion gap at 250 bar · (e) | 0.2 mm |
| Maximum extrusion gap · Extrusion gap at 340 bar · (e) | 0.1 mm |
| Pressure and speed · Pressure · max. | 340 bar |
| Pressure and speed · Speed at pressure ≤ 250 bar | 1 m/s |
| Pressure and speed · Speed at pressure ≤ 340 bar | 0.5 m/s |
| Operating temperature · Extreme upper temperature limit · (T_6) · max. | 120 °C |
| Operating temperature · Reduced performance upper temperature limit · (T_5) · max. | 110 °C |
| Operating temperature · Upper operating temperature limit · (T_4) · max. | 100 °C |
| Operating temperature · Lower operating temperature limit · (T_3) · min. | -25 °C |
| Operating temperature · Reduced performance lower temperature limit · (T_2) · min. | -30 °C |
| Operating temperature · Extreme lower temperature limit · (T_1) · min. | -50 °C |
| Operating temperature · Dimension | Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. |
| Materials · Primary sealing element | Polyurethane (TPU U-1003) |
| Materials · Additional element | Nitrile Rubber (NBR A-8501) |
Family specifications and selection conditions
| Product description | CPV seals are inch sized, double-acting piston seals with a polyurethane slide ring and a nitrile rubber O-ring energizer. Notches in the slide ring edges enable rapid pressurization of the seal to react quickly to changes in pressure and direction. These profiles can usually be installed without special equipment. |
|---|---|
| Manufacturer features | Cost-effective sealing solution • Suitable for light to medium duty applications • Available in inch sizes • Fit O-ring dash-number seal housings • If not in stock alternatives can be produced by SKF SEAL JET systems |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.