SKF · rolling bearings
SKF BA1B 311576
Angular contact ball bearings — manufacturer technical reference and quotation support in Saudi Arabia.
لطلب عرض سعر في السعودية، أرسل رقم القطعة أو المقاس والكمية والمدينة. يُرجى تأكيد التوافق والتوفر والسعر مع فريقنا.
| Bore diameter | 762 mm |
|---|---|
| Outside diameter | 889 mm |
| Width | 63.5 mm |
| Contact angle | 30 ° |
| Basic dynamic load rating | 449 kN |
| Basic static load rating | 1270 kN |
| Reference speed | 560 r/min |
| Limiting speed | 600 r/min |
| Contact type | Normal contact (two-point contact) |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Ring type | One-piece inner and outer rings |
| Cage | Non-metallic |
| Matched arrangement | No |
| Axial internal clearance | Not applicable |
| Tolerance class | Normal |
| Material, bearing | Bearing steel |
| Coating | Without |
| Sealing | Without |
| Lubricant | None |
| Relubrication feature | Without |
| Indicative carbon footprint for new product | 214 kg CO_2e |
| Product net weight | 57.8 kg |
| eClass code | 23-05-08-03 |
| UNSPSC code | 31171531 |
| Dimensions · Bore diameter · (d) | 762 mm |
| Dimensions · Deviation limits of mid-range bore diameter · (t_Δdmp) | -0.075 to 0 mm |
| Dimensions · Outside diameter · (D) | 889 mm |
| Dimensions · Deviation limits of mid-range outside diameter · (t_ΔDmp) | -0.1 to 0 mm |
| Dimensions · Width · (B) | 63.5 mm |
| Dimensions · Deviation limits of ring width · (t_ΔBs) | -0.75 to 0 mm |
| Dimensions · Shoulder diameter of inner ring (large side face) · (d_1) · ≈ | 804 mm |
| Dimensions · Shoulder diameter of outer ring (large side face) · (D_1) · ≈ | 848 mm |
| Dimensions · Distance side face to pressure point · (a) | 271 mm |
| Dimensions · Chamfer dimension · (r_1,2) · min. | 2.1 mm |
| Dimensions · Chamfer dimension · (r_3,4) · min. | 2.1 mm |
| Dimensions · ISO tolerance class for dimensions | Normal |
| Abutment dimensions · Diameter of shaft abutment · (d_a) · min. | 773 mm |
| Abutment dimensions · Abutment diameter housing · (D_a) · max. | 878 mm |
| Abutment dimensions · Diameter of housing abutment · (D_b) · max. | 878 mm |
| Abutment dimensions · Radius of fillet · (r_a) · max. | 2 mm |
| Abutment dimensions · Radius of fillet · (r_b) · max. | 2 mm |
| Calculation data · Basic dynamic load rating · (C) | 449 kN |
| Calculation data · Basic static load rating · (C_0) | 1270 kN |
| Calculation data · Fatigue load limit · (P_u) | 18.6 kN |
| Calculation data · Reference speed | 560 r/min |
| Calculation data · Limiting speed | 600 r/min |
| Calculation data · Minimum axial load factor · (A) | 11.5 |
| Calculation data · Minimum radial load factor · (k_r) | 0.079 |
| Calculation data · Limiting value · (e) | 0.8 |
| Calculation data · Single bearing or bearing pair arranged in tandem · Calculation factor (single, tandem) · (X) | 0.39 |
| Calculation data · Single bearing or bearing pair arranged in tandem · Calculation factor (single, tandem) · (Y_0) | 0.33 |
| Calculation data · Single bearing or bearing pair arranged in tandem · Calculation factor (single, tandem) · (Y_2) | 0.76 |
| Calculation data · Bearing pair arranged back-to-back or face-to-face · Calculation factor (back-to-back, face-to-face) · (X) | 0.63 |
| Calculation data · Bearing pair arranged back-to-back or face-to-face · Calculation factor (back-to-back, face-to-face) · (Y_0) | 0.66 |
| Calculation data · Bearing pair arranged back-to-back or face-to-face · Calculation factor (back-to-back, face-to-face) · (Y_1) | 0.78 |
| Calculation data · Bearing pair arranged back-to-back or face-to-face · Calculation factor (back-to-back, face-to-face) · (Y_2) | 1.2 |
| Tolerances of run-out · Range of section height at inner ring of assembled bearing · (t_Kia) | 80 µm |
| Tolerances of run-out · Range of section height at outer ring of assembled bearing · (t_Kea) | 140 µm |
| Tolerances of run-out · ISO tolerance class for geometrical tolerances | Normal |
Family specifications and selection conditions
| Product description | These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction. |
|---|---|
| Manufacturer features | High-speed capability • Accommodate relatively high radial loads and large unilateral axial loads |

Manufacturer references
Follow the complete manufacturer documentation for application restrictions, materials, tolerances and installation requirements. Limits may not apply simultaneously. We do not publish inferred stock, pricing or ratings.